650/X-2 750 X2 westcoast exhaust cooling hose routing ??

[mattchow88]

Im putting a 750 into my x2, im using the 650x2 westcoast exhaust. Im wondering what suggestions you guys have for cooling hose routing, the pipe i have has 4 fittings 1 into the chamber, 1 out of the chamber, 1 into the bend, 1 into the end of the cone. I have 1 fitting in a stock head, and the x2 cooling is stock as of now. I'm thinking of dual cooliing fitting in pump and running it up through the water exit hose, if needed, also maybe second fitting in head if needed.

THESE are JUST some ideas to work with, let me know what you think, Thanks

 

[mattchow88]

I found this Diagram will this be the best bet for 750, I drew it on paint also

 

[tjindo16]

I have one less fitting on the back of my westcoast pipe. I run it with the stock line with a "Y" fitting to the dual in on the westcoast mani. Then two fittings off the westcoast head out to its own pissers. then i run the dual cooling line to the rear of the exhaust. the fitting on the front of the exhaust has a "t" fitting that one end goes to a pisser and the other goes to the stinger with a jet flow fitting. It has been working pretty well for the past season. Hope that helps.