Search results

Hey guys So I took my ski out for a ride yesterday. After a few hours the ski suddenly died and had no power to the start switch. Got it to shore and checked the battery and it was fine so I jumped the terminals to the starter and it turned right over. When it did it sounded like something was...

All new fuel lines filler neck cap and everything in between

So I just put on the new exhaust and once again no good results. Continues to bog out from condensation on the throttle plates. I also came across a new stator that I put on and nothing.

Everything’s stock on the ski. It’s water condensation on the throttle plates. Once it dies out give it a pump of the primer and fires right back up no problem. The tank has been wiped dry and blown out. All new fuel lines filler neck cap gaskets you name it. I just got l another stock exhaust...

Ya all new fuel lines tank cleaned out multiple times new filler neck and cap. Carbs cleaned and rebuilt. All new gaskets for the exhaust and intake along with head and base gasket. Whole electrical system is new besides he cdi. I have a new exhaust system on its way and gonna try that also.

The electrical system was installed but a local kawi dealer so I’m assuming it’s all oem.

The whole electrical system is new including the stator. The only thing not new is the cdi.

Did everything stated above. Put it all back together and same thing happened. Water in the carbs cut out and died.

The water on the throttle plates is what’s causing it to cut out. Whip them off and it runs perfectly fine again. Once the droplets start to appear it runs like junk and cuts in and out and eventually will bog out and die.

So far that’s all I can find. Hopefully that’s my only problem.

While cleaning the base gasket off the bottom end I noticed a nice crack at the front of the motor behind the stator cover....

.

Those are just spots. No milky fluid and heads flat and no loose bolts.

I don’t think the motors ever been opened up before. I can’t find anything.

I’ve checked the cylinder and exhaust manifold for cracks but can’t find any. What’s next? Replace the base and head gasket and give it another go?

That makes sense I’ll have to check that out. Thanks!

Hey guys I recently bought a 2006 sxr and am having some problems. The ski runs good then cuts out and dies. I’ve come to find out there’s water getting into the fuel system somewhere. After it cuts out I pulled the intake cover and you can clearly see water beaded up in the carb. I have already...