Search results

Interested to see if anyone has bored their own 65v reduction nozzle? It has a 5 degree tilt built in so looks like i cant do it like a 61x nozzle on the lathe or mill. Anyone got pics or tips on how to do this nozzle? 5 degree wedge? Open to suggestion. Thanks

I have a very nicely done 61x bog bore cylinder. Its set up for flat top pistons and currently at 86mm. I was told cpt did the work. It has wiseco 9664m pistons. The bores are good, pistons look good but one has a damaged skirt from being dropped at one point it looks like. What are my options...

I recently finished building another ski and quickly broke the stock shortened pole. My last ski had an AC pole and worked well. They seem hard to find so if i were to go to a rrp cast pole, can i keep my lowered billet bracket, carbon chinpad and blowsion steering that fits my stock pole or...

Looking for a aluminum pole for my sj Ac or umi preferred. Shortend a plus Thanks

I am looking for the following parts for my 96 superjet. Im located in ontario canada but also have a shipping address in 48060 michigan. -ada or R&D angled reed spacer and hardware -clean stock gas tank - clean 62t electrics and stator -a/m chinpad -lowered pole bracket for stock pole If...

Im looking for a lowered pole bracket for my sj. Anyone have somthing they want to get rid of?

I bought a superjet that has this trim setup. It uses hydraulics to move a steering cable thats attached to your trim. Very beefy compared to the bike cable trim setups. Anyone have any idea who made these? I wont be using it if anyone wants it. I dont have the lever unfortunately.

Im looking for a hooker 9/15, solas 144 mag stator section, dual 38s complete with mani an reeds. Would also be interested in a lowered hood an nose piece. Located in canada so need shipped. Let me know

My superjet is sill the factory 2001 blue gel coat (top deck) with original graphics. about 4 years ago i repainted the bottom of the ski an lowered hood/ nose the matching blue using colour rite paint. It looked great for a bit but i ride a lot so after a season or so it started getting...

Wondering if somone can help me out here. I have a 2001 sj, and i bought a ac pole for it probly 5-6 years ago. At the time i remember having to cut the pole end of the steering cable 1.5" because from the cable clamp to the steering pivot was 1.5" shorter. No big deal i used a tubing cutter and...

Anyone in Orlando or fl lauderdale/ Hollywood beach areas? I'm in Orlando now till Tuesday then headed to Hollywood beach for the dania boat flea market. Since this is my 5th time here and I never get to meet any local riders I figured I'd put the word out. If there's anyone that would wanna...

obviously not the first positive thread on troy, but heres another. ordered gaskets and crank seals from him. amaizing prices, lightning fast shipping and a good guy to deal with. what more could you want?? thanks agian man!! saved the weekend:headbang::headbang:

while learning rolls i managed to kick my hadlebars clean off. my heel hurts like hell but will be ok. for the record, i did do a complete roll the attempt before this happened!!

i searched a bit and didnt really find what i was lookin for. My 38mm carbs are out getting brapjacked and will return with a filter adapter pressed in. my question is, has anyone bolted a flame arrester adapter to the bottom of the stock airbox and coupled them to the carb adapter with a...

im looking to replace the cooling lines that came with my b pipe. where can i find that stuff? i dont really like the translucent stuff from blowsion ect.

im about to turf my superjet today and it currently has the stock turf. i was wondering if anyone has turfed over the stock stuff with any luck?? i thought it would be a bit cushier on the feet. would it last? id only be doing the floor not the sides.

i just aquired a free 650 factory pipe in great condition. i did a bit of research and it seems if i buy a limited chamber i can use this manifold and headpipe on my 701??? I wasnt 100% clear on that so i figured id just ask. thanks!

i have a 760, dual oem 44's, factory type 4 and solas j prop. looking for approx jetting specs. anyone with a similar set up? right now im running 115 pilots, 142 mains and 1.5 n/s with dull silver spring. (approx 25 popoff on my gauge) somtimes it hits hard, other times its weak. should i try...

hey, id like to know where people prefer to get their couplers for a factory drypipe. i split mine a month ago and ordered one from blowsion and it took until yesterday to get. i got my ski back together and split the new one too! so i need one fast this time...who do you recomend? thanks

cant somone tell me if my 760 stator will work with a regular 701 cdi?? i can get my hands on one but i wanna know it will work. thanks