Search results

i was wondering how much paint would be needed to just paint above the bond line

motor put together and the squish is too tight its the group k hammer kit and comp is at 180 which is good but the squish is too tight if i change the base gasket i lose comp and the port timming does any one sell recut jsu domes that would give me more squish and keep the comp up ? what shouls i do

should the cooling going through the exhaust go into the exhaust like a b pipe besides the stinger at the end

would a set of 44 sbn buckshot carbs and r and d intake make over stock on a setup of tl flywheel advent wet pipe reeds reed spacers sport port cyl and 180 psi the carbs and intake are the only thing i have not touched

so it is time to redo my whole sxr some new footholds new custom powder coat new turf lil more brap and a one off custom nose piec i all ready did some of the powder coating this is what the ski looked like

so i had a funny prob happen today i rode with my new motor setup and one of the plugs backed out so i replaced both plugs and torque them down and rode on last time when i got home both plugs were lose agian i have a jsu head and the threads are tight also the white part of the plug came lose...

So who is riding the weekend before Daytona I’m not sure I want to ride to make sure both my skis are good but last year I blew it up the Sunday before and had to do a emergency rebuild but I don’t want to go in and break something the first day there . :tapedshut:

so here is what happens when you break a rod at 7,000 rpm in the air sbt style

im looking for best qualty

well heres a lil video hope you enjoy alot better than the last one

the tampa guys test video and my first big roll in surf on video let me know what you think

like the tittle say does the 750 big pin crank have the dows on the bearing to align and will a big pin work in a small pin case i have 10 bolts on intake but its a big pin sbt swaped it out and there is no dows in the crank

so im redoing the powder coat on my x-metal pole small build i need a color here is a pic with the powder removed

so i figure i have about 34 deg of trim and i have it on a pulley system which makes it great. i used the stock sxr reduction nozzel with a x2 trim ring ans steering nozzel. i custom made a plate out of billet and put the 1.5 inch pulley on the trim ring then i feed the cable housing through the...

so my stock sxr pole bracket has a huge crack in it and i was wondering my options i would just weld it but one of the hood hooks bolt holes broke too i know blowsion makes one with the hood and nose piece and all that but i just want the bracket dont know if i want the stock one agian ????

i have a 2005 sxr with foot holds, x-metal pole,rail caps removed, advent cdi, advent tl flywheel, wet pipe, tdr water box, jsu girdle head both at 183 psi, msd coil, lightend to hell, skat trac 13/18 swirl, rd grate, stock ride plate d-cut,1 800 gph bilge, 1'' one way valve, bored nozel to...