Search results

Pretty cool story, not sure if anyone else has seen this on MSW... http://magicseaweed.com/news/ever-seen-a-jet-ski-in-a-barrel/6861/

Can someone help identify this flywheel? I pulled it out of a 650 superjet so I am guessing 6m6. The magnet configuration looks different from anything else I have seen Sent from my iPhone using Tapatalk

I have fried two starter relays tonight. The engine would turn over 3 or 4 times then just click... I think i have narrowed it down to the starter relay: i tested them by testing continuity on the two nuts when holding down the start button-neither showed continuity after briefly running. What...

Not sure if anyone does it this way so i thought i would post. I found out if you pressurize the tank it will start the syphon for you. all you have to do is release the gas cap before it runs out of pressure. Then basically use your fuel pickups to syphon it out. Here is what i do: -Pull...

I had been having some serious issues with my jetski so i finally pulled the engine. i immediately noticed that the coupler would not turn. pulled off the flywheel cover and...

701 62t, new dual 44s. I am starting to tune the engine to the new carbs and when once i start the engine and at idle the engine stutters and then starts going again. It almost sounds like a small thud then it continues. Could it just be misfiring? just a carb issue? or something worse like a...

Ok... stock 701, dual 38s, coffman sizzler, 150 compression, new plugs, spark in both cylinders... So i took it out for the first time of the year and it ran as it usually does for the first 3-5 minutes. Then it started bogging down a bit and when I hit the gas again it would accelerate slowly...

Ok, so i am shortening my SN handpole... if i mess up i will just buy a RN pole but here it goes. I am going to shorten it from the 'business end' where the bars attach. I started by cutting 3" off the end then rounded it back to its original shape.

ok so i have seen all people shorten their handle pole by cutting out of the center. I am planning on getting a hazard bracket/ rn pole eventually but for now i was thinking of cutting the pole from the top and relocating the steering plate about 3" forward. has anybody tried this?

Freshly rebuilt dual 38s on a stock 701. I have adjusted this thing from 135 main jets up to 145 and it is still not right. What is happening is that it can get up to speed well off the line and upon decelerating and then when i hit the throttle again it will not go any faster unless cavitating...

ok, so i have been struggling to get the stock dual 38s on my 61x/62t 701 std bore and not ported engine. i am currently running 75 low speed jets and 135 high speed jets. the it has a 2.5 n/s with 95 gram spring so according to the chart pop off should be around 17 psi. Using the watcon tuning...

I just built my first engine. it is a 61x/62t 701. Today i started it up at the lake and it sounded fine until i got on it and started to go. it had no bottom end and when i hit the gas the engine would pick it up 2-3 seconds later. I think it is a carb issue. any other ideas? what jets/ low and...

quick question: i am pulling the flywheel off a yamaha 650. already have the bolt off... does it just pull off? i tried and it wont budge. thanks for any help.

this is my first time doing engine work and i have read that 1211 is the preferred for sealing cases, gaskets, etc. Locally the only stuff icould find was a permatex gasket maker. Do i have to order it online?

i have a long crack in the corner of my tray. when i push down on the area i can see down to the foam. water has seeped in. is it necessary for me to refoam or should i be ok just fiberglassing over it to reinforce the tray?

I have a Squarenose with the stock 650 motor, coffman pipe, prop, and prok f/a. I top out at the low to mid 30s and want a bit more all around speed. what should i do next without completely breaking the bank?

Starter does not work, battery charged, no click what so ever and there is power going into the starter but not sure about going out?! AHh any suggesttions?! we just got to havasu for S.B. and it died!!!