Search results

New, never used 40cc domes for TPE 1021cc (Recess cut in domes for negative deck clearance with the +4mm stroke). 50/50 pump/race gas compression range. SOLD!

-4.3 Carbon Fiber Superfreak Badass Registered and titled in MN X-metal handle pole X-metal steering system X-metal throttle ODI grips (I can throw in black grips if blue just isn’t your thing). 1021cc TPE motor with low hours (might have a dozen tanks of gas through it) 230psig compression...

If anyone is interested in converting a FPP Type 8 Chamber into a Lay down (wet or dry) pipe, I have one available (chamber only) - SOLD! Back in it's time, this pipe made more power on the dyno than any other pipe on the market but left a lot to be desired as far as bottom end on the sub 800cc...

1. R&D Superjet Race Plate (Pre-08 Superjet only) - SOLD! 2. WORX WR305 Ride Plate (Pre-08 Superjet only) - SOLD! Shredmaster not for sale. Everything else pictured has been SOLD.

TNT Comp Stinger - For high compression/high timing advance engines. I bought this from Tim for a TNT V3 Exhaust system that I no longer own. SOLD!

1. New - Thrust Innovations adjustable hood latch - Black - $62.50 shipped. 2. New - Cold Fusion/RRP hood hooks - Black - $62.50 shipped. 3. New - OEM Yamaha 62T reduction nozzle - stock bore - $90.00 shipped. 4. New - Hurricane industries carbon fiber Jaz 2 gallon fuel cell mount - $80.00...

1. 144mm Skat-trak 17/22 C75 - Worked well with a TPE 1021cc. 2. 148MM Skat-Trak 14/20 D75 - Worked well with a TPE 1021cc. - SOLD! 3. 148MM Skat-Trak 13/22 D75 (marked by Skat-trak as 14/25) Brand New. - SOLD! $160.00 each Price include shipping anywhere in the continental 48 states.

Does anyone from the Alabama area know how to get ahold of vomitspot - Jason? He purchased a part from me but I did not get a shipping address from him and I have not been able to get ahold of him. Thanks in advance, Eric.

After test fitting three different 148mm impellers in a Maxxx 148mm pump last week, I found the trailing edges of the blades on all three of my impellers to sit 7mm to 8mm+ away from the leading edges of the pump stator vanes. I made a tool out of a "couch" driveshaft to hold the impellers in a...

Which straps (OEM waterbox straps, battery straps, etc.) are typically used to secure the Power Factor Chamber and Waterbox to the hull? Thanks,

Does anyone know what Skat-Trak C75 Yamaha 144mm (or Solas YQ-CD) impeller pitch would be the next step up from an Impros 11/17 Hooker Impeller? Thanks, Eric.

I'm trying to get ahold of hangtime, does anyone have his contact information? I purchased a B Pipe from him on August 30th and I have yet to recieve the pipe or any proof of shipment from him. On September 21st he said he would issue a refund by Friday September 25th as he had already spent...

I picked up a stock 95 FX-1 today and I have a couple of questions. The ski has a few scratches in the purple gel coat, does Yamaha, or anyone else sell a gelcoat repair kit or touch up paint that matches this color? I have to finish a few other projects before I start thinking about doing...

I have two Factory Pipe Limited chambers and the stinger on one of the chambers is welded on at about a 30 degree offset where as the other is straight. Can anyone tell me why the stingers are welded on in different orientations? Also, on Factory Pipe's website, they describe two different...

Could someone tell me if there is any difference between OEM Yamaha and ProX piston rings? Both sets (which are now mixed up) have the same cross-sectional dimensions. The height of the tallest part of the Keystone is .047" and the width is .114" on all four piston rings. Is there any problem...

What kind of surface finish is required on the mating surfaces of the crank case halves? Thanks in advance, Eric.

Does anyone know what the Thread size is on the Yamaha SJ driveshafts? Thanks in advance, Eric.

-------------------------------------------------------------------------------- Sometime either late friday night or early saturday morning (June 23rd-24th), JetBoyz was broken into and robbed. The thieves stole nearly $1000.00 in merchandise including Jetpilot apparel, life jackets, hats...

Can someone tell me what the distance from the cylinder deck to the top of the exhaust port is (either in inch or milimeter) on a stock 61X Cylinder? Thanks in advance, Eric.

Does anyone know?