Search results

Was putting my factory pipe wet pipe back on my ski and I was torquing the head pipe to the manifold and one of the bolt hold stipped. Should I use heli cole or a time sert? Anybody know the size I need to get? Any help would be appreciated. Thanks

I have a 800 SXR limited that I run buoys 90% of the time. Was thinking about getting a aftermarket pole. My question is..........is there a performance gain to buoy riding with the aftermarket poles? And if so what? And what pole do you recommend? Thanks

Going to change my matts over the winter and was looking at the Pro Watercraft Ergo Tray Extension and the front tray hump. Never rode a ski with this installed yet. Any opinions if this is a worthwhile mode?

My ski has a Factory Pipe wet pipe and compression is at 180. I use the boat primarily for buoy riding. Looking for more performance out of my ski and was contemplating sending my stock carbs to Group K for true 40mm boring? Is this worth doing or am I better offer upgrading my carbs?

I have a friend that has a lightly used 800 SXR. Always in fresh water and has maybe a dozen rides on it since new. He put it away fall of 2014 and did not ride at all last year. He decided to sell the ski to me and he went to start it and there was no spark. He replaced the battery, spark plug...

I have a friend that has a lightly used 800 SXR. Always in fresh water and has maybe a dozen rides on it since new. He put it away fall of 2014 and did not ride at all last year. He decided to sell the ski to me and he went to start it and there was no spark. He replaced the battery, spark...

Got my Factory wet pipe installed and my new ADA girdled head with dual water outlets. I was running the water lines and have a few questions. The two lines coming from the back of the boat I have the Left line going to the Factory Pipe manifold. The line to the right I have going to the...

I was trying to remove my cylinder from my SXR 800 tonight to install my girdle head. Everything came apart no problem but when it came time to remove the cylinder I can not get it to budge. There is a tab on the left side of the cylinder where I tried to wedge a screwdriver in there to get it...

Was putting a new prop in my 2009 SXR 800 tonight I ran into a problem. I noticed when taking off the stock prop that is was scraping against the pump liner pretty good. When I went to install the new Solas prop I couldn't get the prop in the pump. Never had this problem before what's the...

I purchased a SXR 800 that was bone stock other than a Worx ride plate. I am setting the boat up to be a limited for buoy riding. I haven't ridden the boat yet but I can't get over how far the ride plate hangs off the back. It looks like you would destroy your knees if you fell off the ski...

I just purchased a 2008 SXR 800 and want to turn it into a limited ski for buoy riding. I haven't raced for several years and this is my first SXR. I want to change the prop and while I am in there is it worth putting a pump cone on? How about a pump shoe? Should I bore the nozzle? Thanks

I use to race back in the 90's and have a Twist Girdle head that I want to install on a 95 Superjet I just purchased. The question I have is where do I get a head gasket to use with this head and I would also like to get new o-ring for the domes . Thanks

I was all set thinking I wanted to install a Factory Dry pipe on my SXR. After talking to Factory Pipe and Group K I am not sure if thats the right choice. First reason Factory Pipe does not make it no more. 2nd Group K stated the Pipe is very hard on the motor, and there are fitment issues...