Search results

Going to be making a trip with 2 skis down to this area next week. Where do people ride? I am comfortable in salt or fresh, but don't like the idea of reptiles trying to eat me while I am in the water....

Riva Red Pipe for Waveblaster. Seen mostly freshwater use w/ 1 or 2 trips to the ocean each year. Includes 2 chamber to body gaskets. The bottom bolt on the body to chamber connect tightens but some of the threads are missing - it would benefit from a helicoil or time-cert. $325 plus paypal...

I've recent completed a 1100 63M in a Waveblaster 2 conversion. The engine was bone stock from the donor Raider, and the only thing I did with it besides rebuild the carbs was to remove the choke plates and add a primer, and rebuild the carbs. I used the factory N&S (1.5) and jetting, but I...

With Rule now only making the 25DA, the old midshaft brackets don't work. How do folks attach their bilge pumps so they don't come off? Silicon/JB weld have both failed for me, because the strainer is plastic.

I've got a blaster with a stock 61x. I put a SBT rebuild in it, had about 1 hr on, started running really rough. Eventually pulled it apart, found I had a broken reed petal (were stainless steel OEM reeds). Got a replacement (free of charge, which was nice) from SBT, put it back together and...

Rebuiling an SBN44 for by WB1 with a 61X single carb. Looking at the diagram provided by Mikuni (attached) I have a "late" SBN44, cause I have O-ring and not gaskets. Here's my problem: If I install diaphram 5a and try to measure popoff, I get a massive air leak between the pump body assembly...

Two Ebox questions: 1. Can a CDI box from a '91 650 be used on a '95 701? 2. Who (if anybody) beside Jet Ski Solutions replaces plug wires to the coil?

Started tearing down my engine because I sucked in a reed, and saw this in the water jackets surrounding the exhaust port. 61x out a Blaster. I've got about 7 hrs on the motor, freshwater use only. The material feels chalky, gritty. It's an SBT rebuild...could this be salt coming out from...

I've got a 760 from a Waveblaster 2 that I'd like put in my Blaster 1. I plan to run it basically stock, except for a pipe. I've got an existing Riva Red Pipe for the B1, and understand I'm in for either enlarging the manifold holes or helicoils on the block to match it up the 760 block. Here's...