Search results

Running a single 44mm carb on my Blaster, and I last ran it at sea level. I've since moved to Colorado Springs. Do I need to re-jet for the altitude change?

I found a pinhole leak in the fuel tank today from where it was rubbing against a metal fitting. Can this be repaired with 2-part epoxy and fiberglass cloth, or will the fuel dissolve the epoxy?

Not sure how, but the stator came loose and wreaked havoc on the flywheel. Not the best way to end a Sunday's ride.

Anyone know what the size of the black hose is going from the factory strainer to the thru-hull fitting next to the pump? The fitting seems to be about 1/2", but I can't tell for sure.

I have an OEM Yamaha starter motor with some water damage to the brushes and brush plate. Is anyone aware of any rebuild kits available that would replace those parts. The rest of the motor seems to be in great shape, so it would be a shame to ditch the whole thing just for a few parts.

The SJ won't start. The starter motor spins fine off the ski, although it feels a bit weak. Once I install it I get at best a one second crank, then the relay will only click when I hit the button. It's a new battery with new JSS starter and battery cables. Is this likely the starter, or...

Does anyone know if the Xscream steering systems (standard or adjustable) will work with the stock SN pole?

My company is looking for a company that can deliver ethanol free 93 pump octane to our airport. Does anyone have a source they use for race gas that would be able to send us several drums every few weeks? We've found a few local stations that claim ethanol free, but we'd rather have...

I need to cut out and replace a small section of foam. I goes right under my left foot, so I need something that can support a load. Are there and good materials for this? This way have been covered before, but it's really a pain to search on a tiny mobile screen.

Need a top-end rebuild on the 61x in my Blaster. Instead of shipping my cylinders across the country to get them rebored, I was hoping to find someone in central NC who can do it. Does anyone know of a reputable shop in the area?

Is there anyone in Central NC who can help with a leakdown test on my 61x before Daytona? I pulled the stock head this weekend to install an ADA kit and the washout on the rear cylinder definitely indicates it's running leaner than the front. I have none of the tools with me for this, so I...

Ordered some new mounts for my SJ that I thought were OEM, but they're WSM. Are these worth using, or should I send them back for some real OEM ones?

The stop button on my SJ has developed an intermittent short. I was planning on just disconnecting the white wire going into the button but I want to make sure I can do this without affecting the kill switch.

Installing a Blowsion limiting rope on a SN right now. Should I run the eyelet bolt in place of the steering stop pin, or do I need to find a longer eyelet bolt that will fit through the thicker part of the pole?

Does anyone make a stronger base for the Rule bilge pumps? I'm sick of needing to reattach a new base to my hull every time I breath to hard on one of those plastic tabs while I'm working on my ski.

I'm getting the parts to put together a new ground cable for my SN. Anyone know how long it needs to be and what size lugs holes I'll need?

I'm bolting everything onto a shortblock tonight, and I need to know what to use as a sealant on the gaskets. I have some Yamabond4 lying around, will this do the trick?

Had a little trouble in the ICW yesterday. Wasn't doing anything too crazy, and the engine was running great. Suddently I had a huge power loss and the engine got really loud. Then it completely stopped. Swam it to shore to find that the engine wouldn't turn at all. That and it siezed so...

Need to get the driveshaft out of a toasted pump housing. Is it just pressed in there? I don't want to use too much force to get it out before I know what I'm dealing with.

Trying to finally finish this pump rebuild, and I can't get the new impeller seal to fit into the impeller. I was going to try using a screwdriver to push the little lip inside the impeller, but I worry about tearing it.