Search results

I was letting a buddy ride my 750sxi-pro this past weekend, and after about 10 min of learning to ride it stopped cranking over. Pistons aren't moving, and when I hit the ignition all I hear is what I believe to be the starter spinning. Thoughts? Thanks in advance.

So, I'm about to start jetting/tuning my carbs after doing quite a few mods over the winter, and I wanted to see if anyone could help me out with some good starting points. Here are the mods... ADA Billet Head (28cc) 165ish PSI (I haven't checked the compression yet, the engine is still in...

Without any issues? Just remove the two inner most bolts...

Would there be any issue T'ing the return lines from the carbs into one inlet on the fuel pick-up? My problem is that my fuel pick-up doesnt have a breather nipple and I'm not excited about drilling a hole in my gas tank and creating a nipple.

I just bought a set of 46's and I thought I rebuilt the fuel pumps correctly until I saw this... http://www.mikuni.com/pdf/sbn_manual.pdf It seems like I'm supposed to use the normal gasket > plastic gasket > another normal gasket > o-ring. Currently, I have it set up as gasket > plastic...

So I just bought a factory dry pipe system for my '01 SXI-Pro. The guy I bought it from wasn't running it with the ECWI or the controller. I've read a couple different places saying that you need it and other places saying you don't. Does anyone know for certain?

I just got my new reeds and I'm getting ready to throw them in, but they come with two inserts (air-guides) that are slightly different. For those of you that are using them, which ones did you put in and why?

I'm getting ready to add dual 46mm SBNs to my SXi-PRO and I had a question regarding the lines. Since both carbs will have their own fuel pump, will I need to drill another pulse line into the case, or can I run both fuel pumps off one pulse line? I guess the other option would be to get an...

I've been trying to figure it out on my own, but I admit now that I can't. Do I need to get the girdled ADA head in order for it to work with my factory dry pipe? I've got a 2001 sxi-pro. Thanks!