Search results

My two attemps with a limited 701 setup. Im pretty sure I need to stand up straight and look back to help with the rotation more.

Enjoy

Just want to know if ada domes will work in a blowsion head

I took my pump apart the other day and noticed that the veins/fins on the inside of my reduction nozzle have been grinded off. Just would like to know if this is bad or if I should not worry about it. Or if I should get a new one and upgrade to a board nozzle. Also put a wetwolf cone on and...

Here is a video of a ride through the marsh.I counted 10 gators and a snake but you cannot really see them on the camera.The scenery is nice though.

Just finished my 90 sn.Put a hood nose peice and a XFT pole with a XMW steering setup,new paint and turf.I have not turfed the tray yet but will be doing that this week.

I am trying to figure out how to use a blowsion spring on my xft pole.I have read it can be done but don't see how.There is nothing there for the spring to catch on.

I am trying to put a rn pole on my sn and don't know how to do it.I have a rn bracket but can't see how the hood latch is going to work.Any one have any advice or know of a thread that could help me.Thanks

Great seller,very fast response and shipping.Would do buisness with him any time.Thanks again Torr.

Thought I would try 100 octain AV fuel mixed half and half with pump gas in my stock 701.Bad idea it ran like chit!!Had way less top end and no bottom end.Why is this I would think if anything it should help it.Got home and put straight 93 octain in it and it ran great again. :bad3:

I m trying to figure out why my motor is over heating.It is a SN ,I want to know if the thru hull line on the exhaust side is a inlet or a exit.I had a line running from my pro tec pipe to it but plugged it up and added a pisser from the pipe instead.It is pumping water really good but when I...

Can't seem to find any info on shortening a sn pole.I guess you would just take a section out of the middle but don't know the best way to join them back together.

Will v force 3 reeds off a 750 sx fit in a 701?

My dry pipe is leaking at the o rings where the head pipe goes into the manifold.It is just leaking a little burnt oil near the bottom of the seal,also alot of smoke in the engine compartment.This can't be good for the breathing of the carb. the o rings looked good to me I greased them up,but...

I was riding Friday on the river I always ride on doing some basic trix when a Louisiana wild life agent pulled me over and wrote me a wreckless operation ticket.No warning nothing.There were no boats on the river at the time,I was not jumping boat wakes just doing subs and hood riding.Really...

My sx has a -1 AC pole with a shortend turn plate and O deg. bars.When I turn full left the throttle lever hits the hood.Really sucks when on the hood and pushing the throttle with thumb.Anyone have this problem.Is there anything I could do to fix this?:grumble:

I am running a dry pipe with water injection on my 750 sx.I just added an extra cooling line from the head and the pipe seems to be running more hot now.Also had a friend with a 650 sx who just added a cooling line and blew a hole in his piston yesterday.Why is this?

I have had this problem ever since I bought my 750 sx.Ever time I go out I get water in my gass tank.I have a one way valve on the air breather line,The gas does not leak out but I get water in.last time I drained my tank I had a gallon of water in it.It could have something to do with the...

I have a 750 sx with a AC pole with a chopped down pad andit keeps breaking when I stab or sub.I tried putting some glass on the under side but I just snapped it again today.Im sure if I put enough glass on it it would be strong but too heavy.I can not find any body who sells a carbon or...

Looking for pictures or drawing of of water line routing on a factory dry pipe for a 750 sx. Can any one help?