Search results

Super clean freshwater 760. Mint electronics. Stock dual 44's. Just pulled it out of my ski and it ran great on the water. Fires right up. Compression 160psi front cyl, 150psi rear cyl. It will come with everything you see in the pics. Long block, carbs, electronics, start/stop switch, battery...

These came in a bulk box of parts I got and I have no use for them. 750 Standup E-box, very clean as you can see in the pics but I have not tested - $165 shipped USPS Priority within the US 750 Standup toploader worx intake grate - $115 shipped USPS Priority within the US 1 2 3 4 5 6...

GP1200 complete e-box, no stator. (missing all but 2 ebox cover bolts) $120 shipped USPS Priority 144mm New Prowatercraft Pump Shoe - $150 shipped USPS Priority 20191105_134425 20191105_134439 received_379408706087207 received_2501611570061635 received_770601826688505 received_572931546572102

Bought new and installed bearings/shaft but was never used, not even put into the water. It will come with pump cone only. No bearings or shaft. $950 shipped

Before I get any negative Nancy's, I want to first state these things: Yes, the ski has a smaller engine than stock - it is specifically for my kids The ski has a throttle stop to limit speed Will be ridden in a large private pond, not public water No I didn't want to get a 300sx. I probably...

Ralph Henning doing some tricks on his 550 a few weeks ago [VIDEO]

Here's the race highlights from the Grand Prix of Louisiana - Part of the Powerboat Nationals tour. Getting skis in front of thousands of regular people that were there to spectate. Top notch event [VIDEO]

Picked up a 95 HX a couple Fridays ago and got started on building a turbo spark HX. As of right now, the motor is mounted solid, exhaust manifold adapter is made which puts exhaust exit out the front for a front mount turbo and I set the turbo in the hull to get an idea of what turbo piping I...

I have a 2018 Superjet coming in today and wanted to dress up some pieces off the 760 I'm dropping into it. Did some hydrodipping at home out of a plastic container and used grafitti and carbon fiber patterns. Still need to clear coat but I'm waiting to do that for when I make sure I'm done...

Months of brainstorming and finally made a good start to the project over the weekend. Hull is split, engine mounts are in and should start fiberglassing mounts tomorrow. Will be using a Comp oilless turbo with tial watercooled exhaust housing and Motec M130 for engine management. Stay tuned

The Watercraft Journal did an article on my 701 sport spec waveblaster that I recently built. Hoping to draw some attention to the sport skis and gain new racers with the low cost of entry for a basic spec ski. Check out the article here...

Bought a bigfoot beach cart that is the 4 wheel version. I bought the frame only and need to get some wheels/tires on this thing. Trying not to spend $90/wheel & tire and honestly, I only need a turf style tire.... it does not have to be the balloon tire. Where can I find wheels that have a...

Brought the drone out to the practice lake and met up with some friends to get in some laps. Had 7 waveblasters, a few standups and a couple big runabouts. Watch in 1080p!

Been wanting to build a triple blaster for a little over a year now and constantly searching for the right deal on a donor ski. At the last race of the year, I rode my friends kawi 1100 b1 and thats all it took for me to know I needed one! Finally bought a pair of STX 1100's with one running...

Little video clip from the last round of racing in Baytown, TX.

Here's a little drone clip from riding at Gene's Powersports Saturday. Watch in 1080p

What RPM should I be seeing with a 61x single carb? Mods: riva red exhaust, f/a, 160psi comp, freshly rebuilt carb & tdr waterbox. Impeller pitch is unknown but I would like to know what a setup like this SHOULD be turning so I can make adjustments accordingly. Currently turning 6480rpm at wot &...

Got a new needle combo for my stock single 44mm waveblaster carb and as I pump up the mikuni pop off tester, the carb is still leaking air. It does pop off at 22psi which is right around what I'm shooting for but from what I understand, it should hold pressure until the needle pops. Since I...

I was able to make it to the races this weekend with my Blaster and had a blast! No pun intended.... Brought the drone along and here is some video from a few of the classes. Watch in 1080p!

Met a friend at Gene's Powersports to buy another Waveblaster so I brought my drone to catch some film. Had to leave before most everyone showed up but figured I'd share the vid. Watch in 1080p