Search results

Hallo, im looking for two MSD single CDI coils. Didnt found a shop were i can buy some seperatly without cdi. Someone knows a shop for coils and cables??? Thanks, Andy

Hallo, bought a 155's magpump and need a pumpnozzle and trim for it. Its not so easy to get it in europe. You know what type ski/ partsnumber i need ??? Somebody say 64v and other 63m nozzles.......in confused. What trimrind and steeringnozzle will fit???? Thanks alot, Andy

Hallo, have some 148 props here and a 144solasmag. Have removed a coroded stainless sleeve from a old wearring and measured i have to mill a little bit to come to 148mm+clearance. Then i would sand the statorfront betwin the vanes for good flow. Do you thing it works or should i try this on a...

Sold my molds and work on new model TriXstar Evo. Topdeck was changed last winter with moved footholds forward and widened tray. Now we widen the bottom a little bit, longer the pumptummel and change to a new rideplate.

This is the hull i build with Chad/Hink320 to teach him in infusion/hullbuilding. At moment i assemble it and hope i find the time to finish me 66e/polaris frankenstein for it. Otherwise i use a 8mm cast dasa first time.......

Hallo, 2years ago i build this reduction nozzle. But it needs to much time to do it. Look to went to an sleeve that i glue over an cutted 61x nozzle. The idea is to let it be a kittle bit angled downward and adjust the angle with lower trimangle??? Our hulls flip very fast with 701engines but...

Hallo, i cant find an old tread. There were partnumbers , diameters and angles from some different reduction nozzles. Somebody can remember were i can find it??? Thanks, Andy

Hallo, im working in a new project. For this i need more rod to rod distance. For a build in past i used a stroked SXR and build in a longer middlepin for more distance. But next build starts yamahabased an i need a crank for it. Have 12/16mm 2 identical crankwebs in middle with pressed in pin...

Hallo , im wondering about carbdiameters we use for our engines. All big 2strocke crosscycles are using 38 up to CR 500, only CR 500 bigbore/strocker 680 single need 41/44mm carb and makes 90hp with it. Is there a great difference betwen SBN and MX carburator/engine??? Thanks for your help, Andy

Sorry for asking............ :-((((

........build an sell our hulls in north amerika . I sell a set of moulds and all my knowhow in composite, infusion and visualcarbon. But he must sell the hulls with our name TriXstar and with our stickerset. I like to see some TriXstarski in USA but it is to expensive build the ski in germany...

Hallo, im looking for a strokercrank and the question is what stroke you can get out from a oem crank ??? What rods they use in +8mm to +16mm cranks???? Thanks, Andy

Hallo, i hope i find time to finish my 66e projekt this winter. The cylinder i use is a core and i have to change the sleeves. So i think about using bigger pistons than 951SD/CR500 in costumbuild sleeves??? Somebody know with 2stroke pistons i can use? Think Dasa does not sell them if i dont...

Hallo, i dont had the time to finish my 66e/951build:-(((( Now it is a 62t 90mm bigbore with new jetmaniac crank. Bought many other parts from Jetmaniac : Magpumpe, midschaft , steering/throttlecable; aircleaners, starter, bendix,startstop.......... Is a very good seller!!!!! Hull is 2012...

After selling my 701 green TriXstar im planning my next build . Try to build 951cylinders on 66e cases with stroked and ligthed crank. Pipe is bunchamber and type8 manifold. Hope it works????? Andy

Hallo, at moment i rebuild a engine from sj. After rebuild i have to tune it . But the adjusterholes are blocked. If i remove the capes find i treads to screw the adjuster in??? Thanks, Andy

After 1year of riding and 1winter of molding here is our advancement from TriXstar hull.........TriXstar S. We shortned the hull in front and rear,widened the pumparea. Hull is 198cm long and 18-30kg. Testdrive next Weekend:laugh2::laugh2::laugh2: Andy

Hallo, i traded a 6mm strocker for a sold big engine and rebuild it at moment. But i dont know what rod the enginebuilder used for builing the crank. Its 133-134mm centre to centre , 20mm pistonpin and 26 crankpin. Somebody of you know what rod i have to order??? Big thanks, Andy

Hallo, In december our teamrider robert were at Mallorca (mediteran sea) for wintertraining. He was allone on the beach with his girlfriend. After roberts training his girl goes on the ski......lost control and fall into water:no::no::no: Ski is gone straigth in direction open sea,not...

Hallo,im looking for 144/148 yam Magnumpump. I seached this forum and found the offer from maxx555. Someone of you use a pump from maxx??? Contact and shipping was good??? THanks for your help,Andy