Search results

Hey guys, I need some help and some suggestions if you could help me out. Long story short, at some point in its life, someone used regular screws, not stainless ones in the hood hinge and they were severely corroded and flaking apart, so much so that there waere rust stains on the gelcoat of...

Does anyone have a used UMI Waveblaster steering setup for sale? Paypal ready to go. Thanks in advance!

I'm selling a complete ADA 701 girdled head billet aluminum exhaust mount bracket with all the necessary hardware. It's in very good used condition. It's for the ADA girdled billet head with a stock exhaust System. This bracket only works with the 3 bolt 701 style exhaust. It does NOT work with...

Up for sale is a Greater Performance billet aluminum girdled head kit for Yamaha 701 engines. The domes were machined for a 4mm stroker motor and are in good shape with no pitting (I'm not sure how many cc's the domes are). All of the girdle hardware is there, except one stud, which is readily...

Does anyone have a used aftermarket internal fuel filler such as Blowsion, Cold Fusion, etc for a Yamaha SJ they'd be interested in selling? Paypal ready to go. Thanks in advance.

I thought I remembered seeing this done by someone a while back, but does anyone know how to fit a Blaster Factory B Pipe with a Mod chamber in a Superjet or other aftermarket hull set up like a Superjet? I think there is clearance, but the outlet of the chamber on the Blaster Mod pipe comes...

Seth hooked me up with a great deal on a bunch of parts I needed for my FX1 build. He shipped everything super fast and is great to do business with. Thank you, Seth!

Does anyone have a Pro-Tec ride plate for a Yamaha FX1? I have a Jet Dynamics that I'd be willing to trade, or I'll just buy the Jet Dynamics one outright. Thank you.

Does anyone have a bare ADA girdled head shell (silver color preferred) for a Yamaha 701 they'd like to sell? Just the shell, no girdle hardware needed, no domes needed, no o-rings needed. Paypal ready to go. Thanks in advance.

Does anyone have a used flow control valve laying around they'd like to sell? Paypal ready to go. Thanks in advance.

Last Summer, I bought a beautiful FX1 from the second owner, who owned it for 25 years. He took such great care of it and I promised him that I'd do the same. It was pretty much stock, except for turf, a Skat Trak prop and Jet Dynamics ride plate and intake grate. I love the lightweight feel...

I know the 1990-1993 SJ midshaft housings are different, but does anyone know what the difference in midshaft housings might be between the 1994 Superjet/FX1 midshaft bearing housing unit and the 1995 and up Superjet (and 1995 only FX1) midshaft bearing housing unit? The Yamaha part number for...

Does anyone have a used (any brand) of aftermarket stubby pump cone for a Kawasaki 650 pump? Paypal ready to go. Thanks in advance.

Does anyone have a used UMI round nose Superjet steering setup they'd like to sell? Thanks in advance.

Anyone have an aftermarket 1996 and up RN Superjet high tension pole spring they'd like to sell, Riva, RRP, Blowsion, etc? Paypal ready to go. Looking for something someone might have laying around before buying a new one. Thanks in advance.

Does anyone have an aftermarket billet aluminum FX1 front hood latch laying around that they'd like to sell? Any brand is fine, Cold Fusion, WDK, Wetracer, etc. Paypal ready. Thank you.

I've shimmed lots of Superjet and Blaster engines, but I've never seen this one yet. Everything is lined up as far as the pump and midshaft go, but when I put the engine in on this one, the rear two engine mounts didn't require any shims, the front left required one .5mm shim and the front...

I'm rebuilding a 701 for my Superjet and I had a question about putting Threebond (Yamabond) around the crank seals. I put the Threebond between my case halves and then around the crank seals (as I usually do) and after I torqued everything down there was about a 3/4" section between one the...

I've got a long 2" OEM Yamaha exhaust hose for a 90-95 SN Superjet and FX1. The hose is in very good condition and ready to use. There's a spot where there's some rub marks on the surface of it, but it doesn't affect function at all. This came from a running ski and it works great and is 100%...

I've got a Tom21 fixed steer hood on my RN Superjet and I love it. I just need to figure out a way to keep the hood up when it's open. How have you guys with the Tom21 done this with your hood on your SJ and where exactly did you mount it? Would some gas struts work? Or use a stock...