Search results

Hey guys, just curious if anyone has a .125-.140 base gasket spacer plate (Blowsion doesn't stock or make the .125's anymore) for a 701/760. I installed a Blowsion 785 big bore kit and the port timing needs to be raised immensely. If anyone has anything that would be great. I would likely...

Basically new TJ 1200 freestyle motor. This is a Superjet based 62T motor. Only has 6.2 hours on it. Come with a set of TJ 52mm carbs , TJ billet intake manifold, reeds, TJ speed plate, billet cases and nickel coated yamaha bed plates. This is a push button backflip machine. Toss it in any...

Hey guys. Just seeing if I could get some help tuning a super chicken. It’s got every bolt in imaginable Coffmans pipe Ada head Lightened flywheel Mikuni 44 Pump stuffer Riva intake manifold Currently jetting is now 160Main 117.5low Pop off 15psi Blowsion tornado flame arrestor Ski...

Not on here very often. But I have a set of 52mm TJ carbs that I haven’t used for a while. Not sure what there worth. Currently set up for my 1200. In excellent condition. Can get pics of Insides if needed. And can also provide different jetting. Feel free to txt if I don’t reply 780-214-5777...

Hi there. I'm well aware its a long shot but figured its worth a try. I was hoping to purchase 2 Dasa Nynja 1200's this season but current wait times are months long with no real ETA. If anyone has a very good condition 1200cc motor they are selling (preferably the latest Dasa series) I am...

Hey Guys, I got a R & D head for a Yamaha superjet / blaster that has cracked domes.... curious if anyone has any? I bought Blowsion/ada domes for it as they look similar however they do not fit. I am open do different CC's but would like to keep it on pump gas if possible. I have access to a...

Hi Guys, trying to help a new rider get back on the water. His crank through a rod through the cases and nicked a sleeve bad too. seeing if anyone has anything whether its complete or not we are willing to look at all options. Thank you very much.

Complete xft. Very little use. Basically hasn’t seen the water for close to 5 years. Has all the goods Jetworks stroker motor (6mm but I’ll double check) TL ignition B-pipe Skat trak pump Electronic water injection Black jack carbs Billet intake Set up to run race gas. Full length...

Hey Guys. Just looking for a second opinion on jetting a 760 w/b-pipe, stock head for now, standard 38mm carbs, 144 solas pump, stock electronincs. Its in a freestyle hull. All opinions welcome.. thank you.

So I own an octane with a list of goodies on it but it has no spark. last year before parking it, it did. I have replaced the coil, stator, all the fuses, put a new oem yamaha start/stop switch to test with the black connection disconnected, rebuilt the start button previously on the polaris...

Hi Gents, been a while since I was on here. I am needing to replace the stator on my octane and was curious what model polaris skis will swap over rather then spending the major $$$$$$ on new oem. I noticed sbt only carries one for polaris as shown...

hi guys. I rebuilt a 91 piston port 550. Everything is good I just confirmed that timing is at zero. It's getting amazing amazing spark, turning over extremely fast. I've put fuel down the carbs (race fuel) no fire. Not even a sputter. Not even with carb cleaner. Now I checked the compression...

Hi Guys. just seeing if anyone on here other then the few that I do know are going to be heading to the Lake Osoyoos Races and freestyle competition. We are planning on making the trek from saskatchwan in the motorhome. Hoping a few people on here are so we can learn a little more about...

Alright so this is the beginning of what will be a rather large build. I picked up a class C road warrior on a duramax diesal 5500 platform. I plan on it to hold 7 skis in the garage. Not sure on exact plans yet but I hope to have the 7th ski accessable so that I or a friend can work on it...

Hey guys. Does anyone know where I can find a manual for one of these bad boys. The previous owner HACKED up the electronics bad let alone alot of other things. Anyways this is my most recent project and I was hoping to get it water ready by the time ice is off. Any help is greatly...

Hey guys. I am working on a 1999 750sxi pro and the crank went through the cases. Looking at all my options available. Cylinders look good. The ski has an msd enhancer and factory pipe so best option might be to keep it 750 rather then 800 but let me know what ya think. Thank you

Thought I would post a useful thread to help everyone out shipping bought skis/hulls from the USA to Canada and from Canada to the USA. First off if you live close to the border just drive them across and avoid all the brokerage fees. On average they will charge you 125-175 bucks to do the...

So I bought a stupid js 550 motor and pump of @RKOmotorsports and we agreed on a price shipped. He said he was looking into shipping for me to canada and ND. We just said screw it ship it to ND. He then charged me 65 bucks ontop of the agreed upon price for shipping. whatever i can live with...

Bought another lightweight TL flywheel had a few issues with it a year later and #zero no questions completely repaired it and sent it back up to me. Thanks again man. More purchases to come! I would highly recommend.

Hey guys. I'm selling off a few of my skis this winter and am taking on a small but interesting project. I want to build a freestyle ski capable of multiple combo's with a small reliable motor like a SS850. I also have full intentions on it being possibly the lightest ski in my shop which...