Search results

I have been filling and shaping some damaged spots on my hull and after sanding the microballoon infused epoxy I have been left with some small pinholes. I figure I would need to fill these somehow before painting, I was thinking a very light brush or rolled coat of epoxy resin (either plain or...

What do we think went wrong? I think he just had a hone on a scored cylinder and put stock bores pistons back in there, so I'm assuming a cyl might have caught a piston ring.

Just did a top end on my 701. Not my first rodeo with 2 strokes or PWC engines, but my first 701. ADA head, B pipe, single 44 stock 61x bottom end. It ran great for 15-20 minutes during break in. Then I came back, took a rest, went back out and it ran as per the title. I pulled the head and...

Skat 9/17 Small Hub - $100 + ship Solas YB-SC-K 15/18 Standard Hub - $100 + ship RRP Riser Bars - SOLD Wetjet Pipe - Cut and weld to run on SJ. $150 + ship with all hardware and aluminum bracket. X Scream Steer System with straight bars $125 + ship Can bring all to Wave Rave this weekend...

As title. Cutting the outlet and re-welding it 180 degrees out should give you a nice ~18hp boost on a stock 701, from what I've read. Please do some reading on the modifications you need to make to this to run it on a superjet before buying. Includes the aluminium head bracket and all...

I need a proper tank for my WDK ROK. Let me know what you have out there. I like the JAS / H2O designs but I don't know if they still sell.

Strange one. Fitting my trim cable, ran it through one of my thru hull tubes, no problem. Decided to use a different one for pump waterline clearance, so I go to pull it bscn thru the hull and now it's stuck. I can't move it back or forth. It's well and truly stuck in there. I've tried...

First ride on my new ROK, rode for abit, went to head back out and it wouldn't turn right? I swam it back to the shore and found this. Not sure how this even happens.

I'm really confused as to why my throttle cable won't have enough throw to leave my throttle plate untensioned. It's a stock throttle mount and a stock SN cable. Frankly I'm absolutely knackered and don't have the energy to investigate further myself at this time so if anyone has any photos or...

I know how to install a primer and fuel select, my question is - where? In an oem you obviously usually have them in the tray. But my tray backing space is really restricted by the e box. Would j kick myself to install it inside the hull? I can think of one time I've ever had to switch fuel...

Time to open a can of worms, does anyone have a contact for anybody at Waterdawg Kustomz? Friend of mine is looking at purchasing a ski.

Do these use a spring? My basket case wdk came with a spring but I don't believe these use a spring? It has two pinch bolts on the side, nothing that goes straight through. Any ideas? I've never run a pole without a spring before.

So, I picked up a rough WDK ROK hull last week and started to put it together. She needs paint bad but I want to hit the water first to see what I think and then paint it over the winter. I still have my superjet to ride so she might hit the water for a few weeks, feel out what I like about the...

1996 Superjet not charging. 760 cases (and therefore slightly different stator?) MSD Enchancer Measured and confirmed good readings: Green to green resistance AC output. I have tried three different voltage regulators. I am not seeing much above 12.7v on the DC output, even while revving. I...

I ride mostly flatwater lakes in Indiana. I like to chase boats, freesyle, mostly just hang out with friends and ride. I don't race or compete. I've come across a WDK ROK-R (EDIT: ROK not a ROK-R) setup for a superjet driveline. I already have a full 96 superjet that runs great, I could just...

Picked this up last night. 760, b-pipe, footholds, trim system, bored nozzle etc. Has an X-h2o sticker so figured it might be one of you guys. Won't run right in the water apparently, I've not had it out myself so we'll see. Has an MSD Enhancer, will this work on a 760?

I am building a high compression ported JS440 motor out of a spare I had laying around. Aiming for .040" quench height with a copper head gasket. Do I need to run O-rings? Both the head and cylinders will be freshly machined surfaces.

Afternoon all, I recently picked up my first standup, a 1980 JS440. My parents had these back in the day so it's cool to be riding the same skis as them. The ski came in boxes and we put it together on the night I got it and had it on the lake that weekend. It's a nice ski with a westcoast...