Search results

Are there any tips or tricks to eliminate the slight kink where the exhaust hose curves up and over into the waterbox? I've tried different hoses and it's always done this. Doesn't seem to be affecting power (or is it and I've never known)? Always seemed like a stupid design to me. Not looking...

Mine's developing cracks so wondering if anyone has a decent one they're willing to part with? Yami part: HOSE, FILLER EW2-U7844-00-00 It's part #39 in the attached pic. Thanks! Sent from my iPhone using Tapatalk

After installing turf on a RN SJ, when reattaching the rear trim piece behind the tray, what size (length & diameter) rivets do I need? I'm sure I can figure it out but wasn't sure if there was a known spec someone could please share? Thanks!! Sent from my iPhone using Tapatalk

I came across a used b pipe set up a while ago for my Superjet but noticed the wider end of the chamber that connects to the head pipe was dropped or something because it has a flat edge. You can see it in these photos, the opening is more of an oval. Am I asking for an exhaust leak if I install...

I installed the AC Racing handle pole on my square nose and it sits slightly crooked to the right when you're on the ski. This causes it to hit and rub the inner side of the hood when the pole is lowered. The OEM pole I had on the ski didn't do this and the bracket seems solid and in place...

I swapped out my OEM water box on my waveblaster and wondering if there are any tips or tricks to getting the water out of it? Maybe try to reduce one hole somehow and hit it with compressed air? I've tried tilting it every which way but not much water comes out. Not a big deal but would like it...

In need of a full length UNCUT B1 long exhaust hose. The one from the water box that goes thru to the rear of the ski out the exhaust. Thanks!

Not in dire need but would like to eventually replace my exhaust hoses, especially the long one. So looking for something in good shape. Is anyone making A/M hoses for blasters? Also am in more immediate need of a front bumper. Thx! Sent from my iPhone using Tapatalk

I've been checking out used SuperJets in my area to potentially purchase. When I've asked the owners about their winterization/storage procedures, a few of them mentioned they do not fog the motor because they store it in a heated garage all winter. I thought fogging is always recommended per...

Looking for the glove box cover lid for a 2003 Yamaha FX-140. OEM part number is F1B-U517H-00-00. Sent from my iPhone using Tapatalk

Looking for the long one from the water box back. OEM Yamaha part number is EW2-67555-00-00 but I was hoping someone makes a silicone one that fits? I need to figure out something for this 1994 SJ. Thanks! Sent from my iPhone using Tapatalk

Greetings all, I've searched and cannot seem to locate any instructions on replacing the steering assembly on a Waveblaster 1. I'm wondering if it is necessary to remove the upper section of the hood in order to gain access to the bolts on the steering column? It seems this is necessary, so if...