Search results

Just double checking no one has one on the east coast before buying one from kommander

Looking for a "29" big pin cylinder. As far as I know this would come off of an 96 sxi, sxi pro, 96+ 750zxi, ssxi

A couple guys asked about these after I made a one off one for myself seen here: https://www.x-h2o.com/threads/66e-conversion.198714/page-2 Planning on a run of 10 or so in the next month or two. I've changed the design somewhat with some stuff I learned on the first one: I changed to 3 pieces...

Anyone ever buy from these guys? Is he a member on here? Just found the website and they have good pricing on rebuilt and hotrods cranks, much cheaper than other places I've seen so just making sure no one has horror stories before I buy haha. @BruceSki any experience?

Looking for a good crank for an 03 sxr, I was under the impression it was the same as any big pin 750 crank but correct me if I'm wrong. Might also be interested in a complete motor if the price isn't too crazy. Looked at sbt but they're 5-8 weeks out on the crank and I need something running...

Looking for a flat water hull was interested in the wdk ones because afaik they have 66e mounting options as well. Would be interested in other hulls too if the price is right. Lmk what’s out there, I’m located near Rochester NY however would be willing to have something shipped, or drive a ways

I laser cut a battery box for myself, and figured I might as well get a couple and see if anyone wanted one. They fit the Shorai LFX14L2-BS12 Battery, 14 ah, 210cca, 1.5lbs. Case Type 2 Length 4.45" Width 2.28" Height 3.50" so will fit other batteries about that size. Its a tiny battery and...

I made 125 of these one way valves cause my buddies and I needed a couple, 6061 aluminum anodized black, hdpe check ball, 304 stainless retaining clip. $24 shipped each $44 shipped for two: Will give bulk discounts if anyone wants to stock these, @JetManiac ?

Had to come up with some type of trim for my amp, I figured if I'm making something anyway why not make it easy to use. So I bought a magura retrofit hydraulic clutch for my dirtbike(backup plan) and put this together:

Just being lazy and wondering if anyone knows the bolt spacing of the stock round nose pole bracket before I rip the one off my ski to measure it. Do all the aftermarket hulls use that same pattern?

I thought I had seen somewhere why people don't generally use them, but cant seem to find it again. I now have 3 sets from three gp800s I picked up for parts. Is there something I need to modify to use them in a stand up? I read the groupk page that says they generally suffer from a lean...

Whipped up one of these yesterday, got material for 4 for which was $180 so $45 each. I thought it was easier to use square tubing for the legs vs the angle you usually see

I plan to convert either my xfs, or highroller amp hull to a 981cc (89.5mm bore) 66e. Started mocking it up in a spare squarenose hull I had. Made some quick and dirty mount adapters to see how it would fit at the stock angle: It lines right up with the superjet midshaft using the stock...

Definitely a shot in the dark, but is anyone on the x in Costa Rica? I'm going there for a week and would love to rent a stand up to ride while I'm there if someones got a ski sitting around. Voy a Costa Rica, quiero alquilar un jetski. In spanish too lol.

Looking for a blown up 66e for a reasonable price. Would love to get something complete with a good crank that just needs a top end/replate, but beggars cant be choosers I suppose. Willing to buy a whole ski if its not too far and a reasonable price.

I was going to re-pin my stock crank to a 4-6mm stroker. I had seen somewhere that some of the earlier stroker cranks up to 6mm were re-pinned stock cranks. Anyone done this, anyone still doing this? I pressed apart a blown stock crank last night. Looks like you could probably get away with 5mm...

I made one of these cause it sucks trying to get smaller batteries to stay put in the stock battery tray, anyone else want one? This fits the WPS 490-2524 which I believe I chose cause its got about the same specs as a deka etx16l, just its 14lbs lighter.

Anyone interested in something like this? I made this one for my superjet. It brings the bars a lot closer to the pivot and lets you just run a straight set of 7/8ths bars. I made this set to take the stock bar clamps but could make it for fat bars/whatever. There's a lot of aftermarket steering...

I searched and saw the RTF crew but the last thing I saw posted was from 2015. I see @eastcoastjumper and @BruceSki are from long island and still active on here. I moved upstate but still go home a couple times a year. Headed back next week with two superjets and a blaster, trying to ride some...

Is there any rulebook for the vintage open class in east coast watercross? I'd like to know what I can do to my 650 square nose, can I put a pipe on it? I don't see anything in any of the ijsba rulebooks about the vintage class, and east coast watercross does not seem to have their own rulebook.