Search results

JJC568 and I had some fun at DURHAMTOWN PLANTATION in Union Point GA this past weekend. Here are a couple pics jjc568 is on the ktm250sxf i am riding the yz450f

it looks like a sn with a seat a motorcycle forks

are wet jet reeds the same as reeds for 62t?

ok jjc568 and i put a 701 in his 750sx hull. he was running a blaster pipe, but now we are going to run a b pipe with limited chamber. The 750 fuel tank wont work with the limited chamber an sj tank fits in there, but the chamber won't fit with the sj tank. I found a js300 tank on...

I was told these were mikuni 46's. the don't measure out to be 46's, they measure 44.41mm at the bottom. it seems as though the f/a adapter is made into the carb and does not come off. the f/a adapter also is a smooth bore and continues about half way into the carb throat. are these blackjacked...

I bought this head about a year ago and never used it. Can anybody tell me what head it is and who made it? It has removable domes in it, but they are no where close to the same size or shape and an ada head. so i know the domes from an ada head will not work in it.

are 61x and 62t stators that same? can i use a 61x stator with a 62t flywheel? My brain is shot! I swear i used to know the answer to this. :dunno:

has anyone ever used a skat 7-12? i came across one pretty cheap and was just wondering if anybody has any feedback on it. it looks like a swirl 7-12.

what size pump does a gp800 have? I have looked for about an hour a can't find it. Does anybody know? 144mm or 155mm?

jetmaniac sold me a cylinder and even dropped it off at team scream for free. great guy will deal with again!!!!

I picked up the guinness buildoff winner hull from garrett last weekend. Now I have 2 build going at once. My sn build will be put on the back burner for a little while. So far I got a ski innovations waterbox installed and a steering cable. I ordered a trim system from x scream, a prop from...

which one is a better cylinder?

http://cgi.ebay.com/ebaymotors/Yamaha-Superjet-Wave-Runner-701-760-Reed-Intake-Spacer_W0QQcmdZViewItemQQhashZitem5ad0a84694QQitemZ390047745684QQptZPersonalQ5fWatercraftQ5fParts

what companies make heads other than blowsion, ada, shark-fab? Please post links to thier sites so I can check them out. Thanks for the help in advance.

i di a search on here and came up with nothing. who sells the girdle hardware that holds the cylinder down when the head is removed?

what is the biggest i can safely bore my 61x cylinder without making the sleeves paper thin. i still want reliability just a bigger bore without changing the sleeves.

I have a mid shaft and bearing for a sn. Should the shaft pull right out of the bearing/housing? Also can the bearings be replaced and where would i get the bearings?

what is the best way to remove and oem hood seal without damaging it? i really don't want to f@c( it up because they cost over $100 and this one looks pretty new.

i have a 650(6m6) sitting around and I am wondering how far can i bore it and what mm and brand of piston.

http://cgi.ebay.com/ebaymotors/YAMAHA-WAVE-BLASTER-1994-701-SINGAL-CARB-RUNNER_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem4a9a819fa6QQitemZ320419766182QQptZPersonalQ5fWatercraft found it on ebay, it's cheap so i figured i would post it up.