Search results

Found a crack in the bottom of my ski, so i poked two hole in the bottom deck and this is what i got after 30min. Looks like I'll be defaming another ski this winter :doh:

Been having the same problem for a while and cant figure it out. I got a stock 701 with a ADA girtled head and sizzler pipe. ski funs great out of water, funs fine on the hose, but soon as i put it in water it will fun poorly for about about 30sec and die. pull the plugs, there soaked, cylinder...

nothin special.. just foolin arround at the river

i got a trim setup for my sn and the pump nozzel it came with has the stock bilge inner part ground down and welded shut. i only have one 500gph pump, will i be ok? or if i drill the hole back through will it still work without the inner "hump"?

i am in the process of installing footholds and de-foaming my sn. when i cut out the foothold and began to de-foam i found my ski has a little tunnel full of water in the foam. the puddle is about a half inch deep. its right at the bond rail. the foam in the gunwale is bone dry but below that...

so this past weekend i yanked my foot strap out of the hull and make a nice little hole, and now that i can see the wet foam ima go ahead and de-foam it. my question is that if i re-inforce the hull like i was gunna run no foam and install drains and fill the thing with polystyrene beads (like...

im putting together a 62t 701 and im missing the spacer between the reeds and the intake manifold. can i go without it? or does anyone know how thick it is so i can make my own? in the parts diagram it looks identical to the gasket so i figure i could use that as a stencil. this is the only...

i plan on putting a 701 motor in my 650 sj soon as i have the money and i have been collecting parts for a while. so my question is i have a cdi off a 701 62t sj motor and i know it has a higher ref limit so would it do me any good to put in on now? maby get a little more out of my 650?

i got a 93 sn 650 all stock and i went riding this weekend and when i came back in through the no wake zone the ski started vibrating pretty bad, enough to kinda blur my vision. now every time i start it up it vibrates pretty bad and it always ran real smooth befor. it only does it at idle and...

i got a 87 js550 that wont run. it ran fine last season and when to take it out this weekend and cant keep it running. it will start with the primer and rev if you give it throtle but dies right away. if you try to keep it running with the primer it bogs and backfires through the carb. i did a...