Search results

Looking for the bushing type Cold Fusion fat bar turn plate. Thanks!

Brand new complete SBT top end kit with 82mm pistons. $200 shipped.

Worx ride plate for a kawasaki 750 sx/sxi. Top looks great, bottom could be cleaned off and re-painted but ok powder coat to protect the bottom so i left it for the buyer to decide! $100 plus shipping

I swear there was a thread on how/what to use to remove the water spots on a factory pipe chamber but after searching found nothing. So what is everyone using? Limited pipe was new 2 years ago and can't seem to get those hard water spots off. I have tried water and vinegar I believe I mixed up...

Looking for a clean round nose superjet hull, located in michigan! Maybe travel for the right one, Thanks

Few parts for sale! -61x stock exhaust spotless condition $80 plus shipping -stock sj fuel pick up $20 - Vxr pro complete 144 pump 61x nozzle, $ offers

What is everyone running for the elbow from the b pipe to water box on a sn sj? I am running a cheaper 90 silicone hose because i was never able to find the right size to fit the smaller 2 1/4 b pipe to i believe 2 1/2 TDR water box. Correct me if im wrong on measurements, this was a while ago...

Just got a new b pipe and before i order what factory pipe recommends just wanted to see what others are running and tuning? Altitude about 600’ All stock 61x with single sbn 44 Blowsion f/a Boyesen carbon reeds Also water routing- does it matter if i run the cooling line from the stock head...

About to purchase a limited b pipe but says it is for a 96 and up will it still fit in a 94 sn?? Everyone i have asked said a b pipe is a b pipe? Just would like to make sure. Thanks

Ok about to install some watercraft factory tubbies and know most of my buddies foamed their tubbies but the guy I got them from said no foam? Said to add weight and just get water logged? Also what to use to put them on? my bro used 3m 5200 but only at a store (west marine) arround here and a...

I just got a sbn 44 and was rough but put some tlc into her and she looks great! And the some that saw the other post on the 3 or 4 hole fuel delivery I got a 4! Anyways it was off a triple set up so the fuel pick ups or inlets are different, one has a double and both are realy small? The last...

Ok looking for a carb for my kawi 650 sx and just which one!? I posted in general for the main question what types of sbn 44 carbs are there. saw an old post but would like to know more? What is better the 3 hole or 4 hole both 44 also put into play my mostly stock 650 sx looking to pipe and get...

First video ever put together and not too bad! First time out this year on the north channel and boat wakes where small and not a lot of action :( but still had some funn in the cat tails so tell me what you think thanks!

I have been looking arround for a head gasket my 650 sx. I have seen all types and thicknesses just need to be a little more explanation. Been told to use stock but not finding much but saw copper amd stainless steel. Herd copper increases compression but heard alot about thickness too just not...

Just about to scoop up a new head gasket for the 650 sx and found a couple just what is the differnce in the thickness? Do i want a thicker or thiner gasket for my stock head? Also just what kind or what one should i get?

Just put on my west coast ep7500 head with 29 cc domes and the 650 is pumpen out 200 psi too much!??

I was told to get a 800 sxr head gasket for my ep7500 head for 650 but the cooling holes dont line up should i cut them to match? Also what way does the gasket? bumpey side up or down

I just picked up a ep7500 west coast head and want to replace the orings. Been told to just put some old spark plugs in and tap on top of them to pop the domes out. Tryed and failed the domes dont want to come out tried some pb blaster and still nothing. Anyone have some ideas to get the domes out??

Just picked up a west coast head ep7500 with 29cc domes. The o-rings are not looking to good and would like to replace them just how?? And what head gasket do you use?? the stock one goes over the o-rings when u place it on the head not sure if it should like that

I got this 40 mm carb for free a few days ago and thinking about putting it in my 650 sx but need a manifold! Iv herd of just takeing a dremel and makeing a 38 to match a bigger carb or if i should find a manifold or even send it out to get it bored? Also how much of a difference is a 40 mm carb...