Dasa 1200 5 port impeller pitch

Looking for impeller recommendations.

Dasa 1200 5 port
62t ignition, Zeel cdi, jetinetics wheel
Se 50 carbs
Pfp pipe run wet
Push 155 pump
P&P veloci-raptor trim.

I was running a 14/21 lb/tb in an XI hull with 155 maxx pump with JSN1200, 760 zeel total loss, pfp wet, and full spec 49’s.

Not the same setup but relatively close. Just sharing in case that helps you get close with prop pitch.

I still have that prop if you are interested. Prop only has about 12-15 hours on it.

riling354 said:

I was running a 14/21 lb/tb XI hull with 155 maxx pump with JSN1200, 760 zeel total loss, pfp wet, and full spec 49’s.

Not the same setup but relatively close. Just sharing in case that helps you get close with prop pitch.

I still have that prop if you are interested. Prop only has about 12-15 hours on it.

Click to expand...

I think your Jsn is a good amount more powerful than my old 5port. But it gives me something to go by

Probably 11/17-12/18 as a ballpark to start

Was running a 13/21 cut back 5mm in a 14 vein skat mag with 50 full specs, rrp pipe, msd total loss, 210 psi, etc in my carbon badass and still have the prop on the shelf as well.
11-12 will be very close for you on the bottom, the 5 port pulls hard up top I’d be in the 19-20 range personally and you can make tweaks from there.