- Location
- High point NC
2002 superjet
NC title in my name ready to transfer
I bought this ski with a 701 in it and it needed midshaf bearings
I pulled everything apart with the intention to ride it this year and life got in the way and don’t see getting it done this winter.
I have a full list of new and used parts to put everything back together and would be a good winter project
I have a full 760 I was going to put in there
Fresh top end bore and pistons from Joey at HSI and heilcoil installed to adapt to factory pipe
Brand new never unboxed factory pipe
Good set of 760 electronics
760 crank all bearings spin freely and quiet
All new gaskets to assemble and new crank seals
The carbs off the 760 are clean and I have rebuild kits for them just need to be set up for the pipe and all that.
I have the 701 that came out of it with electronics it will need a top end
I have another 760 I pulled out of a sit down that is complete that will come with it the mag piston has some pitting on it and would need a top end.
Everything with the 760 is there and ready to assembled
The hull is not perfect but does not leak water or anything like that.
Please call or text with any questions
I WILL NOT ANSWER TO IS THIS STILL AVAILABLE.
336-848-4645 ski is in NC
I have more pics I can PM or text if interested
NC title in my name ready to transfer
I bought this ski with a 701 in it and it needed midshaf bearings
I pulled everything apart with the intention to ride it this year and life got in the way and don’t see getting it done this winter.
I have a full list of new and used parts to put everything back together and would be a good winter project
I have a full 760 I was going to put in there
Fresh top end bore and pistons from Joey at HSI and heilcoil installed to adapt to factory pipe
Brand new never unboxed factory pipe
Good set of 760 electronics
760 crank all bearings spin freely and quiet
All new gaskets to assemble and new crank seals
The carbs off the 760 are clean and I have rebuild kits for them just need to be set up for the pipe and all that.
I have the 701 that came out of it with electronics it will need a top end
I have another 760 I pulled out of a sit down that is complete that will come with it the mag piston has some pitting on it and would need a top end.
Everything with the 760 is there and ready to assembled
The hull is not perfect but does not leak water or anything like that.
Please call or text with any questions
I WILL NOT ANSWER TO IS THIS STILL AVAILABLE.
336-848-4645 ski is in NC
I have more pics I can PM or text if interested
Attachments
-
IMG_5510.jpeg232.9 KB · Views: 34
-
IMG_5509.jpeg251.4 KB · Views: 35
-
IMG_5511.jpeg187.8 KB · Views: 34
-
IMG_5512.jpeg199.7 KB · Views: 31
-
IMG_5514.jpeg188.8 KB · Views: 30
-
IMG_5513.jpeg153.5 KB · Views: 29
-
IMG_5516.jpeg176.4 KB · Views: 30
-
IMG_5517.jpeg230.3 KB · Views: 30
-
IMG_5506.jpeg114.9 KB · Views: 31
-
IMG_5491.jpeg168 KB · Views: 34