WFO Speedracer's latest activity
-
WFO Speedracer replied to the thread A snapshot in the glorious life of a jet ski technician.I will take some real pics next time I take one out for more than two minutes. -
WFO Speedracer replied to the thread Flipping couches for fun and profit.I spent about 30 minutes with 2000 grit sandpaper to get the rest off , It has a couple of small gelcoat dings, smaller than the head...
-
-
WFO Speedracer replied to the thread Superchicken wont hit max RPM.Thanks for the update , now I will know where to start.
-
WFO Speedracer replied to the thread Flipping couches for fun and profit.I am always keen to start a new project , now finishing one well that's a different story but anyway here goes. The 97 GTX is not quite...
-
-
WFO Speedracer replied to the thread A snapshot in the glorious life of a jet ski technician.A friend of mine or should I say he was a friend at the time , came by one Sunday and wanted me to clean the carb on a Honda XL70 he had...
-
WFO Speedracer replied to the thread A snapshot in the glorious life of a jet ski technician.So I had mentioned I had a quasi business partner earlier , his name is Doug , I have been trying to mentor him a bit and I can see that...
-
WFO Speedracer replied to the thread Yamaha how it's made.That shot is from the Honda outboard factory in Japan .
-
WFO Speedracer replied to the thread Kawi 650 water in cylinder.One other thing Kawasaki cylinders are known for pulling up the deck slightly where the studs are put in at , it may be out enough that...
-
WFO Speedracer replied to the thread WDK F1-PRO (B.C. Canada).Go to this site : https://imgur.com/ Upload your photos , right beside the IGMUR logo is a green box with a + symbol in the middle ...
-
WFO Speedracer replied to the thread Kawi 650 water in cylinder.There is one more place but there is a story here so wait till the end. When I worked at the Kawi dealership we sold a new Kawasaki X2...
-
WFO Speedracer replied to the thread Another Seized Impeller.I have a huge exhaust fan at the shop and had to buy a rather expensive 220 motor for it , the pully on the old motor had a set screw...
-
WFO Speedracer replied to the thread Another Seized Impeller.Weld a big a$$ nut onto that impeller and screw it off then cut the nut back off . One other random thought I had on this . I know how...
-
An inside look of how Yamaha watercraft are built at the factory in Newnan Ga. , click n the link below ...
-
WFO Speedracer replied to the thread GP 1100 with 1200 cylinders port matched.It all works together but the carb pulls fuel through the low speed circuit at all times and throttle settings , what I described is...
-
WFO Speedracer replied to the thread GP 1100 with 1200 cylinders port matched.Ok I had a minute to think here and I am not sure how far out the low speed adjusters already are right now , before you change anything...
