waxhead's latest activity
-
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.If you’re running OEM 44s, the stock manifold will be fine. In fact, I’d rate it as the second-best manifold out there. All the work I...
-
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.Best way i know to blow up an engine is to over prop and make it build huge heat. Then you get to blame everything else as to why it...
-
Wwaxhead reacted to kevbo's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with
Like.
I would talk about carburetors, if it made as much an improvement. Do you know your port heights? How far will your pipe rev before it... -
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.46 mikuni are the unsung hero. i used them on my 550 i raced at the worlds. The ski was fast and responded well. The rider not so much haha
-
Wwaxhead reacted to WFO Speedracer's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
My choices are defiantly dictated by a budget of zero dollars and I have OEM dual 44's so you know what I am going with.
-
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.How to Turn Your 701 62T Into a Real Mini Weapon Start with a stock Yamaha 701 62T. First job: remove the stock head and throw it away...
-
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.my carb choice goes like this and its worked out of your budget. 1 being no budget 4 being best budget 38s oem44s 46 mikuni and...
-
Wwaxhead reacted to fastgtfairlane's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
The 62t in my opinion is the best of the 61x and 64x cylinders. It still has decent port timing stock, the casting and sleeves are...
-
Wwaxhead reacted to E350's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
@WFO Speedracer This fits within your title of "I need some knowledgeable opinions on 61x versus 62T -64X cylinders" While @waxhead is...
-
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.lol sounds like my garage
-
WThat’s a blast from the past.
-
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.OK, but its sunday morning here and the suns out, can i do it later but really happy to do it and you will be surprised what you can do...
-
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.A stock 62t is 118 transfers the same as 61x except they are not closed over with casting. The exhasut is where it differs and the 61x...
-
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.The 61x will not have more bottom end snap than the 62t 701, the transfers are to blocked from the factory. you are more than capable i...
-
Wwaxhead replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.A 701 62t is way better. By the time you port a 61x to make power you actually go past a 62t anyway. the reality id you can widen the...