Storbeck's latest activity
-
SStorbeck replied to the thread Getting back into skis. Need help..For sure go to the sortie. If my junk is all running I have a superjet, an x2 and a chicken you can try out if you want. Lots of other...
-
SStorbeck replied to the thread Bilge control options.There are pretty simple water sensors that basically have exposed electrodes at low voltage and detect the slight continuity caused by...
-
SStorbeck replied to the thread Suggestions For Repairing Damaged Brass Hull Inserts?.You may be able to drill a couple of small holes around the perimeter of the insert, use a syringe to inject jbweld or maybe thickened...
-
SStorbeck replied to the thread Small hub impellers scrap?.To offer up a (basically useless because I have never tried this at all) opinion: I'd put whatever the lowest pitch one you have in...
-
SStorbeck replied to the thread Small hub impellers scrap?.That might be an interesting question for the OG guys that have been around for a long time...is there anything an old school small hub...
-
SStorbeck replied to the thread Need advise on 750 swap.Sure but if you did all of that to a 750 it would run circles around the 650.
-
SBefore I got my weapon I could only do two flips sometimes but not real well on my rip.Now I'm about 10 rides into the weapon and here...
-
SStorbeck replied to the thread Superchicken wont hit max RPM.Maybe we're not talking about the same exhaust? I meant the big green thing. Used on 96 and 97 sts and 98 stx
-
-
SStorbeck replied to the thread SXR 800/SXi 750 Flywheels. Same?.I'm seeing same part number for all sxr flywheels including 03, but I'm surprised to see it's unique to sxr and there are a few...
-
SStorbeck replied to the thread Superchicken wont hit max RPM.the big pin and stx exhaust combo manages to push a giant stx hull so it seems like it should be able to work in a chicken.
-
SStorbeck replied to the thread Super Jet Speedwerx Dry pipe on 62T 760?.I got confused reading this because the title of the thread says 760 and speedwerx pipe, but you have a pfp pipe and an xscream 900...
-
SStorbeck replied to the thread Superchicken wont hit max RPM.Not 100% sure, but I believe the chicken uses an odball nozzle that is aluminum and 82mm, but the location of the bolt holes for the...
-
SStorbeck replied to the thread Help me build a Phantom.He's probably using an oem 155 wear ring from a couch that is designed for the long bolts to go through and thread into the pump shoe...
-
SStorbeck replied to the thread Prop pitch and detonation.I listen, and I appreciate.
