Recent content by ScottyRocker

Hi Guys Looking at replacing my stock B1 bars for either 7/8 Pro Tapers or Blowsion bars. Any recommendations? What pro taper bend is best for the average rider? Cheers

pump porn! Thanks Chris

Thanks for the reply, where did you have your 'T' going to the pisser?

Hey Guys, I've got a 97 Twin Carb B1 with a Riva Red pipe which i feel is running a bit hot. I know there's a number of ways to route the cooling for these, i just wanna know that I've done it right. It runs single cooling from the pump and has a stock head. Pump - Manifold Fitting Top of...

yeah I'm thinking a new carb might be the best option

I have a carb (38mm Mikuni) that has had the tip of the Low Speed Adjuster snapped off inside the carb. Does anyone have a way of getting this out or is it time for another carb? Cheers

Hi guys Stripped one of my engine mount hull inserts in my superjet, just wondering if I could get away with tapping this insert out and using larger bolt? Or what are my other options? This seems to be the easiest fix. Cheers

We ride backwards down here bud

The NZ waters can't wait to be ripped up by this bad boy! Thanks Chris

Hey guys ive been changing my motor over to a round nose hull that ive bought and one of the engine mount hull fittings is stripped, Not sure where to go from here in regards to fixing, anyone have any ideas? Cheers

Thanks for the help guys

Will the older shaft work in the newer(94+) housing is what i want to know??

Hey guys ive recently bought a roundnose hull and im in the process of transfering everything off my sqaurenose. Now ive just discovered that the intermediate housings have a different bolt pattern. Im going to have to get a newer housing but can anyone tell me if the mid-shaft will fit this...

i ride 50% surf 50% flatwater at moment, so bit of both. I also are using 0 deg bars

thanks for all the replys guys. im 5'11" and also this pole is going on my sqaurenose with hazard bracket