Recent content by ready to ride

Lucky the piston didn't come up high enough to hit the sides of the cylinder walls. the piston wouldn't fit in through the top in either cylinder. I looked at the rigs and the looked to be free and not hung up on anything. I did notice at the bottom of the sleeves that one side has a...

just went back to the machine shop to talk to the guy who did the machine work. and he told me that everything was In intolerance. I told him that there's no way because the piston wouldn't fit into the top of the cylinders only through the bottom.so the hole can't be the same size if the...

Yes, I checked my other ski and the gauge is working properLy. It's 63 in one cylinder and 66 in the other. I've pulled the top end back off and the rings look to be ok and not hung up on the walls.

I just rebuilt my motor. 84.5 mm pistons with a the high compression ada head. I did a compression check before i put the motor back into the ski and only came up with 63 pounds psi. So I removed ada and put back on the stock head. Also came up with around 60 psi. I know there's a break in...