Recent content by parky07

9/17 cut back skat trak swirl.

I bought the kit from princess auto, not sure if you have them in the states? all direct replacement units, just plug and play. I think its worth the upgrade for "cool" factor alone. They are crisper and brighter to look at, last 50000hrs and they draw way less amperage which doesnt really make...

I started with 160 high 125 low 2.0 n/s

Id like to see someone try the sponsons. I ride my buddies 550 and it seems so keep the pump in the water around the bouys. Go for it! Stock length ride plate, quadrafin is a nice one. I run a stock pump with a scoop intake(a must on lakes) and a 9/17 skat track cut back prop(would never ride...

x2^

That guy could flip my sx hull...ya I said it

This sounds rediculous but are you running resistor plugs? Pretty sure it doesnt apply to skis but its worth a try. My paps wasnt running resistor plugs on his skidoo and for whatever reason it was dying then coming back to life, same as your ski. Switched to BR9ES from B9ES and bam problem fixed

I run a 44sbn on my small pin. Works perfect, great throttle response.

Im running 160 high 125 low 21psi pop off

X2 on that Nei Pryde 5/4/3 steamer with booties and gloves for the cold days, then I rock the 3mil shorty. Kindof a big jump, as long as you keep moving its alright:P

Interlux Perfection. Best marine paint around Expensive but worth it.

I used a black spring

I forget the spring I used, Im rejetting it for my 750 today so ill let you know

I have a 650 with westcoast manifolds, west coast pipe and a 9/17 skat and I run 115 low 145 high 2.0 n/s Ran 40:1 all season. Setup ran perfect, no bogging and kept the plugs a little wet

PLD on pwctoday.com makes tube style poles for almost any model