mikesx's latest activity
-
Mmikesx replied to the thread What Impeller for Stock Pump with 61x Engine and B-Pipe?.The only props available for the stock FX were Solas 17/23, 18/24, 19/25 and a 21/26 you could special order. I ran all 3 of the readily...
-
MIt's a Yamikawi Superjetski .
-
Mmikesx replied to the thread Freestyle Leaking oil from exhaust .It’s gotta Kawasaki 765 ? That looks like a 62T Yamaha w/a B pipe in the pic….
-
MDid the Engine suffer any carnage as a result? Spill da Beans. Inquiring minds want to know...
-
MThe Charge coil on the stator died from what looks like overheating. The female connection on the brown wire of the MSD had a slightly...
-
MThat is awesome. What failed?
-
Mmikesx reacted to JC-SuperJet's post in the thread The Opposite of Bogging FX-1/Super Jet with
Like.
Check for Air Leaks in the Engine, but also along the Exhaust System all the way to the Water Box. You can spray soapy water along the... -
MSorry for all the LSP doubters!!! I had a minor part failure on my S1. I contacted HSI, which told me warranties are direct with LSP. I...
-
Mmikesx replied to the thread Yamaha FI-722 120hp 2 stroke.Agreed !!! Here's my Bun WITH starter, flywheel, just minus carbs...
-
-
MOK, I am mystified. Happy, but mystified. This worked. Pipe wrench on the already destroyed splines (see first photo in this thread)...
-
Mmikesx replied to the thread How to Remove 1994 SN SJ Drive Shaft?.Stand that pump up vertical and fill the gap between the impeller and shaft with PB Blaster or equivalent penetrating oil and let it sit...
-
M@E350 if you haven't already destroyed it... It's pretty crazy what a longer lever can do. Sometimes I can't break things free with a 3...
-
MPhantom hybrid infused hull, TPE 1021, Power Factor pipe, Full Spec 49’s, MSD, Lighten flywheel, 148 MAG pump, RRP trim, Ultra light...
-
MI just put in a new Zeel. The old zeel is still good but figured I should have a backup on hand. I also picked up a Weeks Brothers ebox...
-
Mmikesx replied to the thread Power factor water line set up.You may want to add a spray bar. Small displacement motors respond really well to a little water injection with PFP setup's.
