Recent content by MadFish

  1. MadFish

    ADA domes 38 cc

    Pics... Sent from my SM-N950U using Tapatalk
  2. MadFish

    ADA domes 38 cc

    Two 38cc ADA domes that came off a yamaha 760. I had to change to 35cc when we changed out to a 735 top end. Great condition. $45 shipped Sent from my SM-N950U using Tapatalk
  3. MadFish

    44 carbs and intake manifold

    I've got a set of working 44 carbs from a 760. When we replaced the top end with a JetManic ported 735 we put in new 115 pilots, 120 main and 95g springs to match the new top end. We also rebuilt both at the same time. Has flame arrestor adaptors and a primer kit installed. Comes with intake...
  4. MadFish

    SOLD 62t carbs two sets stock filter

    still have set 1?
  5. MadFish

    Surfriding Lake Michigan, St. Joesph area riders

    10-13 foot waves tommorow, need riders. Text me @269-759-9872 if you want to get out tommorow Sent from my SM-G950U using Tapatalk
  6. MadFish

    Oil in exhaust pipe and tuning question

    I'm breaking in new cylinder and pistons running 30:1 mix... is it common to have a lot of oil in the rear exhaust pipe? Also, I just started to tune the carbs. Right now it seems to jump from 1/4 throttle to 3/4 throttle with no 1/2 throttle. I'm running a 735 JM blue ported (was a 760)...
  7. MadFish

    Factory B pipe tuning screws

    Thanks! Sent from my SM-N950U using Tapatalk
  8. MadFish

    Factory B pipe tuning screws

    Picked up a project ski with a factory b-pipe. Top and bottom adjustment screws were drilled out and re tapped with 1/4-20 bolts. The middle adustment screw is seized and stripped out. My question is: how much of a difference do these tuning screws make? I was planning on just backing out...
  9. MadFish

    Help with carb settings - 44s and 735 JM ported top end

    Thanks! I appreciate the starting point to try. I'm not very experienced with carb tuning, so this should be a good learning experience for me and more importantly, my son. I really don't want to hassle with selling and buying carbs...I want to be on the water in two weeks. Sent from my...
  10. MadFish

    Help with carb settings - 44s and 735 JM ported top end

    Chris said he had no experience with this particular set up, but figured someone here would some suggestions. Sent from my SM-N950U using Tapatalk
  11. MadFish

    Help with carb settings - 44s and 735 JM ported top end

    I picked up a SN with a 760 motor and dual 44s for a good price. Ski has factory pipe, ada head and several other am parts. Price was cheap because I have to defoam the hull, which is not a big issue since we just did it with our RN. After I pulled the engine to work on the hull, we removed...
  12. MadFish

    SURF VS. FLATWATER SKI??

    I appreciate the discussion (I had the same questions). I'm pretty much in the same boat. Stepped away from the sport for 20 years and I feel like I don't know anything now! :)
  13. MadFish

    Freestyle Flips and such

    we dropped to 55 in lake Michigan this week...
  14. MadFish

    Freestyle Labor day ride 2016 video

    Nice vid... and nice boat as well...
Top Bottom