Recent content by lcgordon

Thanks I will try the 115g springs. It should not be clogged. It all went through the ultra sonic cleaner multiple times. It has good response off the bottom if you keep it cleaned out. If you slow down for a few sec then it can need to be cleaned out again.

Stock flame arrestor and don't know pop off. I am a bit confused with pop off so ill ask my questions. I had read somebody said at my elevation 5280' go from stock 115g spring to 95g spring. Anyways that is what i did. I have done some research and lots of people talk about pop off but if you...

Loving the ski, Seems to work really well, The new plugs seem to work well. Ski still feels light when jumping after it has been in the water. Still a bit rich on the bottom, Takes some cranking to start it up in the water and have to hold it wide open. My question is can you really hurt...

I tried buying it from him and we were texting about it then he fell off the face of the earth. I would love to still have it if i could.

Got these versi plug micros in from jet maniac yesterday. They are 3/8 so they went right into my previous holes. I think these will be awesome.

Pm sent

I filled up through the drain holes with the hose and tilted it back. Most of the water came out of this area. And some out of the back hole. Gonna try to epoxy these up and try to get some 5200 on the bond line in the back. I also bought from jet maniac some versi plug minis. They screw right...

We’ll my piss poor method of sealing the ski did not work. Rode for about an hour and about 2-3 min of drain time to get all the water out. I would guess another gallon or 2. Has anybody had any luck if trying to jam silicone or 5200 in the cracks on the bond line from the outside. I think...

https://pwcparts.com/riva-yamaha-1990-2003-all-gpr-versiplug-drain-ry8101/?gad=1&gclid=CjwKCAjwvpCkBhB4EiwAujULMq6_R7L8WrEQho2lqyYHYPD3ZetTtAvZDMo873rgbwayHCi6vFjsRBoCeXYQAvD_BwE Are those better than the ball drains like this? I have always wondered. The duckbills seem like you could break...

Thanks for the info. I’ve seen ppl use the Verdi plugs or whatever. Glad to hear I was not the only one. I figured it would not be perfect which is the reason for pink foam and drains. But I did not think that much. I’ll see if I can get it sealed. If not I’ll go with the different plugs like you.

Well had a bit of a problem. Drilled the holes for my drains in. The back and about a gallon of water came out. I was like crap I’m not tearing it apart to fix it. But a gallon in 30 min ride is bad. I went ahead and put the inserts in. I then blocked off one side and put the air compressor in...

So pumped. Got it together and was able to sneak in a 30 min ride. Everything worked. I turned the high speed out an extra turn because I did not have time to tune so I did not blow it up. I’ll have to do a little testing. Really really excited that was a lot of work.

It is getting really close. Carbs are rebuilt and motor is in. I hope to test ride it next weekend.

Perfect haha. Yeah mine works but not as perfect as I would like.

Got the turf done I’m pretty happy with it for my first time. I screwed up big time with a mental mistake and cut it straight back. Did not have enough turf to redo. So just had to add a patch. So glad to be done with this. Time to get it all back together.