Recent content by krashr

Assuming these were never made (referring to js/sj's post)? Sounds like a good idea, I believe AC and UMI poles also have the contour on the pole to utilize the stock handlepole lock/stop. Or if anyone has an OLD R&D like in the pics for sale please PM me!

Do OEM 760, 5 finger couplers have the same thread to fit on a 701 SJ midshaft? I know the crank side fits cause its already on there, but not sure about the midshaft side? Also do 650 couplers thread onto 701 SJ midshaft?

I'm helping a friend buy an aftermarket hull and donor boat to complete the build. It is on a pretty tight budget to start but was thinking about using a 760 from a waveraider? A couple questions: Crankshaft and cases appear to be same as a 62t motor (they are 64x designation)...

Thanks for the info. I guess the one that FPP sells is a 45 degree. Can anyone comment if a 90 or 45 would be better for putting a limited chamber in a RN with a stock waterbox?

Sorry for the long link but are these not made for exhaust applications or what is the deal with the $50 one that Factory Pipe and others sells vs this one? If the ones on ebay shouldn't be used, what is everyone using when they say they use a OEM coupler, just any Yamaha exhaust hose with a...

KTM434 what would the thickness of the newer vs older flange be? I just want to check mine to see if its the newer or older one, it came from a 95 Waveraider so its at least 95+ (which is still REALLY old)

I bought a motor from Matt and he packaged it extremely well and was super fast on shipping! He forgot to send the bedplates and was a little busy so he had a friend send me a set so I would have them ASAP. There was one minor issue when I received everything, but I contacted Matt and he took...

OK, sounds like one of the 3 will work, does anyone have a length on the negative cable and the positive cable from the battery to the Ebox?

I'm using a donor Ebox from a Waveraider and I believe they are too short, still gathering parts and don't have the Ebox installed yet to measure.

Does anyone know if there is actually a different intake for the 08+ Superjet or did they just modify the mold a little to make it perform well on both 96+ and 08+ (since its the same bolt pattern). Also how can you tell if an intake is the deep model or the non-deep model? I'm assuming you...

Just got a Coffman Sizzler and it didn't come with the 3 bolts between the manifold and headpipe. I'd like to buy a set of stainless ones from JetManiac but he isn't sure if they are the same bolt/thread size. Can anyone confirm or deny if they are the same?