Recent content by Kendyl318

  1. Kendyl318

    62T Starter Issue

    Hey guys, Looking for some advice/help. 96 62T Waveblaster 1. Went to start it but nothing at all. Checked battery, ignition wires, starter solenoid, start/stop switch and continuity everything seems to check out. However I stuck my hand down to the positive wire that connects to the...
  2. Kendyl318

    701 62T Waveblaster No Power to Coil and No Spark

    Turns out the charge coil went bad
  3. Kendyl318

    701 62T Waveblaster No Power to Coil and No Spark

    I checked the brown/white and the white/red while grounded and got 0 reading of ohms for both. A friend mentioned that my stator is toast or it has a cut/damage to one of the wires. Here is my cell maybe I could text you with some questions 9168049755
  4. Kendyl318

    701 62T Waveblaster No Power to Coil and No Spark

    Hey guys, I am relatively new to the diagnosing game but I'll do my best. I've got a 62T blaster with no spark. Here is what I have tried so far: Disassembled the Start Stop switch/checked continuity for all 4 wires to ebox and they checked out. Replaced new coil Replaced with a CDI from...
  5. Kendyl318

    Factory B Pipe for Sale?

    Looking for a factory B pipe for sale for a wave blaster 1. Pleas help!
  6. Kendyl318

    ISO Reduction Nozzle

    My bad, thank you
  7. Kendyl318

    ISO Reduction Nozzle

    If so can you send pics please?
  8. Kendyl318

    ISO Reduction Nozzle

    Hello I’ve got a waveblaster 1 and I’m looking for an 85mm reduction nozzle 61x Non-trim If anyone has one for sale let me know
  9. Kendyl318

    Pro-Tec Pipe Adjustment

    Hello all, I've got a 701 waveblaster 61x with a Pro-tec Pipe. I have never tuned/adjusted an exhaust pipe before and noticed adjustment screws on the sides. Does anyone have any expereicne, info or advice for this or just simply how to adjust? Any info would be greatly appreciated!
  10. Kendyl318

    JetManiac MASTER PARTS LIST - New/Used Yamaha and Custom Build Parts

    Looking to buy some parts and questions on pricing. How do I personal message you?
  11. Kendyl318

    Problem that needs Solving

    Problem fixed! Turns out the in-line fuel filter and the basket screen in the carb were full of debris and preventing fuel to go through the carb. Also, one of the check valves in the carb had somehow been pinched inwards. Replaced/cleaned the items listed above and now the ski runs...
  12. Kendyl318

    Problem that needs Solving

    Definitely going to check fuel tank now that I noticed debris in in-line filter. Next step is carb pump because I have a feeling there is going to be some type of debris in there.
  13. Kendyl318

    Problem that needs Solving

    Agreed. You mentioned fuel issue and I had the same feeling.
  14. Kendyl318

    Problem that needs Solving

    UPDATE: Took it out on the lake and it had the same issue with the new cdi so I ruled out cdi. Next I swapped out the in line fuel filter (a lot of debris) and that helped! It didn’t die like it normally does, but still running at about 70-80% capacity (as if it’s struggling a little bit). I...
  15. Kendyl318

    Problem that needs Solving

    Thank you for all of the suggestions. I am heading to the lake tomorrow to test out some repairs. I have ruled out all engine suspicions. I am thinking it is a few things. 1. Bad CDI. 2. Bad Coil inside ignition box. 3. Bad stator. I am going to leave the carb alone until the last...
Top Bottom