JC-SuperJet's latest activity
-
I have a spare one if you want to borrow it Don’t use metal spoons you need the tension from the plastic -
-
JC-SuperJet replied to the thread Weird motor issue.
-
-
JC-SuperJet replied to the thread Any gueses?.
-
-
Battery acts as a buffer for transients and spikes in voltage. Regulator rectifier could have intermittent grounding loss due to...
-
JC-SuperJet replied to the thread Electrical Help Please.Plus he's using an MSD Enhancer (DC) which runs directly off the Battery...
-
BS yes it is true that the entire ski runs off the small gauge black ground wire that ends at the stator but if the negative battery...
-
JC-SuperJet replied to the thread Super Jet Piston blowby.Is that a Powervalve Cylinder? If so, those might be $200 dolla Forged Pistons; jus' sayin'...
-
JC-SuperJet replied to the thread Super Jet Piston blowby.Take compression readings and see if its past the Service limit. Just hook up a Battery with a Remote Starter to the Starter for the...
-
JC-SuperJet replied to the thread Electrical Help Please.You can also attach sacrificial Zinc Anodes onto some Aluminum Parts like the Ride Plate, similar to how Yamaha puts a Zinc Anode inside...
-
-
:eek: Incredible to learn this at my age....Thanks guys !!!...Electrical Engineer and building skis for 30 years and I can now hopefully...
-
JC-SuperJet replied to the thread Electrical Help Please.Yes, anodizing creates a non-conductive aluminum oxide layer on aluminum that serves as an electrical insulator. No Bueno for Ground...
-
What blew my mind recently is learning that aluminum anodizing is NON-conductive.
-
JC-SuperJet replied to the thread Electrical Help Please.For those who think that a bad Battery Ground location will not damage electrical components or cause erratic performance, go ahead, do...
-
So if we’re to believe the information given to us, every single component has been replaced with an oem component. Which leads to it...
