Half flip95's latest activity
-
H2000 superjet, XS carbon hood and nose, XS771 short block package, Team Scream modified Boyesen intake and TS modded dual 46's, XS...
-
HHalf flip95 replied to the thread SE 50mm Ninja Carb failure.I don’t know exactly. I just handed off the carbs to them.
-
HHalf flip95 replied to the thread SE 50mm Ninja Carb failure.Luckily the "plug" did not fall into the engine. I did lose power, land on my head, and sink the ski though
-
HJust want to share my experience with the SE 50mm Ninja carbs. I ordered a set through blowsion. Before purchasing I had heard of shops...
-
HHalf flip95 replied to the thread Getting back into skis. Need help..I used to tell everyone to get the squares, but after all these years, I say get the roundie 96 and up. They run better, they ride...
-
HHalf flip95 replied to the thread Super Jet Speedwerx Dry pipe on 62T 760?.anyone know how big the stinger is on the SXR800 dry pipe?
-
HHalf flip95 reacted to kevbo's post in the thread Super Jet Speedwerx Dry pipe on 62T 760? with
Like.
A stinger set for smaller displacements is a contributing factor. There can’t be very many tuners racing your exact engine combo so you... -
HHalf flip95 reacted to waxhead's post in the thread Super Jet Speedwerx Dry pipe on 62T 760? with Like.
Increasing the squish made it more likely to deto but i dont think its a deto is Oh i thought we were talking about a speed werx pipe...
-
HHalf flip95 reacted to kevbo's post in the thread Super Jet Speedwerx Dry pipe on 62T 760? with Like.
Those are large diameter pistons , you will have to find a way to reduce temps. I suspect lower compression and later ignition timing...
-
HHalf flip95 replied to the thread Super Jet Speedwerx Dry pipe on 62T 760?.The stinger on this pipe is tiny, i don't think it is flowing enough exhaust, i've heard of people going bigger, but how big?
-
HHalf flip95 replied to the thread Super Jet Speedwerx Dry pipe on 62T 760?.I can't imagine being over propped and turning 7650, It gets there in a hurry. But I have always questioned the accuracy of the zeel 760...
-
HHalf flip95 replied to the thread Super Jet Speedwerx Dry pipe on 62T 760?.Engine came with 45 thou. “Pump gas domes” I ran 50/50 91/110. Curve with 30* max advance to 4500 and tapering down to 15* Bumped the...
-
HHalf flip95 replied to the thread Super Jet Speedwerx Dry pipe on 62T 760?.Update: can’t get it to stop melting the piston edges. Pulled timing out, increased squish, 110 octane … maybe the stinger is too small...
-
HHalf flip95 replied to the thread RRP Exhaust setups.I believe the rrp instructions call the waterbox injection optional
-
HHalf flip95 replied to the thread Who wants good head.I want a dome that runs on 91 pump gas on a 760 ported with your 196* template with a wetpipe and oem cylinder deck height