fastgtfairlane's latest activity
-
X2 on the pole breathers. Pole breathers alone poorly feed a 61x stock pipe single carb. If your buddy was running an OEM 155 he... -
fastgtfairlane replied to the thread Tigercraft V3 Build.964 will be a good time in the v3. One of my buddies put a 1021 in his with a similar setup as you. Hes also running 46s, a zeel cdi...
-
There is lots of good advice in this thread. I think you should find out what the issue is, or more likely issues are, “before throwing...
-
Have you replaced the positive and ground cables? If not, good idea where to start. and Install it to the starter bolt..........
-
move ground, check voltage and report back (voltage running)
-
fastgtfairlane replied to the thread Electrical Help Please.bad ground will cause all kinds of weird issues. are you certain that youre frying stators and cdis? i understand youve replaced them...
-
it wasn't trying to it did at least for a short period of time anyway . I had a Waveventure 1100 that was having all kinds of...
-
Another option is the Solas 148 pump which has the same or better performing vanes for less money, and is a 2 piece pump for easier prop...
-
Dose it cook the stator and cdi when you are out riding or when you go to restart it? Ground cable crimp at the battery looks less then...
-
I have new motor with all new electrical and electrical is connected properly with no shorts(triple checked). It has a TBM light weight...
-
Just curious to see how many you got to stack up against each-other over the years and if one in particular really stood out against 6+...
-
fastgtfairlane replied to the thread FOUND.I ran some oem 44s on my stock 62t before I had it ported and bored over. The key with the stock 760 manifold is filling the crossover...
-
38s are awesome compared to bigger carbs that are tuned badly
-
dude run the 38's and save the php/vf3 for big motor. If you had to purchase something than id say do it one the right way but if you...
-
Blackjack 44's work well also up to 850cc!!!!!!!!
