fastgtfairlane's latest activity
-
fastgtfairlane replied to the thread 2015 Superjet w/MSD cdi has spark, compression and fuel, but erratically starts for a second every few tries, then dies immediately..There is a much better solution over the enhancer. The Zeeltronics y62t cdi is a much better cdi mainly because it is adjustable with a... -
fastgtfairlane replied to the thread RRP x-lite ovp steering SOLD.Im curious if would be difficult to convert the rrp or blowsion steering to a bushing instead of the bearings.
-
fastgtfairlane replied to the thread 300/440/550 Anyone recognize this 550sx?.I dig the paint, dont recognize the ski however it is a js550, not a 550sx. The sx hulls have different padding on the tray and rear...
-
No doubt keeping it dry is best, especially in saltwater, but I do have one that has been mounted to a board kinda like what you would...
-
I spray my wires where they go through the eletrical box wiht crc softseal and it and it does the same thing. thats the only issue i...
-
fastgtfairlane replied to the thread Zeel 62t.I use a little silicone on the grommets for the wires but the biggest thing is to NOT over tighten the screws holding the box together...
-
fastgtfairlane replied to the thread Zeel 62t.Ive got 5 seasons on my 760 zeel. I went through 2 of them before figuring out how to properly seal the ebox. Keeping water out of the...
-
Anyone need this hood? It is currently with Paul Lehr Just lowered the price to $450
-
I heard a Rumor , Chris @JetManiac will be attending!! Free Parts for everyone! Lol JK on the free parts! Stoked he is making the...
-
fastgtfairlane reacted to kevbo's post in the thread GP 1100 with 1200 cylinders port matched with
Like.
The bottom screw feeds the lowest fuel inlet hole. It’s to adjust idle mixture only. Pilot jet feeds the holes just above lowest one, it... -
fastgtfairlane reacted to Jetskimann's post in the thread Complete List of Engine Builders Specializing in performance SJ motors with Like.
European manufacturer of freestyle engines and parts. and individual CNC repairs https://jetskimann.com/o-nas/
-
fastgtfairlane replied to the thread Want to Buy Found.I have some 4 degree rrp bars im probably not gonna use anytime soon.
-
I’m running a 12/18 with a solas 12 vane pump. I did have a 11/17 in it and it was a rocket but was giving away a lot of top end. I...
-
fastgtfairlane replied to the thread Custom/Hybrid Blue Devil.It needs a home built custom stainless cone pipe.
-
If you have to get back behind the motor (say for waterline) it is a bitch..........