fastgtfairlane's latest activity
-
fastgtfairlane replied to the thread Carburetor (specs) Database: SuperJet and Blaster 1.Generally speaking, opening the bottom screw and closing the others will give better top end with a slight loss in bottom snap.. you... -
fastgtfairlane replied to the thread Carburetor (specs) Database: SuperJet and Blaster 1.10/16 hooker would work. But not all impellers are the same. The pitch is just 1 part of it. The root angle and blade thickness also...
-
fastgtfairlane replied to the thread Carburetor (specs) Database: SuperJet and Blaster 1.Those are much better than the stock carbs. Your jetting sounds close. Your water and pipe tuning can affect the power output as well...
-
fastgtfairlane reacted to IanG629's post in the thread Carburetor (specs) Database: SuperJet and Blaster 1 with
Like.
theyre new aftermarket from mikuni with no choke and it came with t handles and im running a limited chamber -
fastgtfairlane replied to the thread Carburetor (specs) Database: SuperJet and Blaster 1.That impeller is probably too much for your engine depending on your reduction nozzle diameter and cone. An over pitched impeller can...
-
fastgtfairlane reacted to mrfist9's post in the thread Blaster 96 WaveBlaster 1 (Redemption) with Like.
Yeah definitely I run weatherpacks on everything gonna just match it to everything else I got
-
fastgtfairlane replied to the thread PJS Viper9000 super cylinder w/total loss static timing.Gonna depend on the compression and fuel you use. Higher octane would need more timing. 30-32 degrees would be ok for pump gas as long...
-
fastgtfairlane replied to the thread Blaster 96 WaveBlaster 1 (Redemption).Id say you probably found your issue. Id cut that off and install a duetch connector that way you can remove the ebox separate from the...
-
fastgtfairlane reacted to WFO Speedracer's post in the thread The Opposite of Bogging FX-1/Super Jet with Like.
I really should not have to say this but shouldn't you have figured this out then installed the B pipe , oh wait that would make too...
-
fastgtfairlane reacted to holygoat's post in the thread The Opposite of Bogging FX-1/Super Jet with Like.
Easy test would be ground the pink wire and see if it changes the operation. Should severely limit the RPM. I bought a "bad running" SJ...
-
fastgtfairlane replied to the thread The Opposite of Bogging FX-1/Super Jet.Do you have a stock cdi you could try? That will tell you if your msd is bad without sending it off.
-
Ha ha Those moments make you feel like a hero, Love those moments
-
Honestly the best option for a Stock 800 is the stock prop. If you want to do ONE thing to stop cavitation on an SXR.... FILL THE PUMP...
-
fastgtfairlane reacted to john zigler's post in the thread SXR 800 Pump replace or repair with Like.
750 and 800 pumps are the same. the ONLY difference is the cooling fittings tapped into the pump on the 800 are 1/2" instead of 3/8"...
-
I have Destroyers being delivered today, and i found someone to swap out a Bpipe for the RRP. Then I will also need to repicth to a...