fastgtfairlane's latest activity
-
fastgtfairlane reacted to WFO Speedracer's post in the thread What Impeller for Stock Pump with 61x Engine and B-Pipe? with
Like.
ADD , ADHD , DAMNIFIKNOW , I need to know right now and don't know how to do a Google search ? But on an unrelated note does anyone... -
fastgtfairlane reacted to kevbo's post in the thread What Impeller for Stock Pump with 61x Engine and B-Pipe? with Like.
I would save the pipe for something with a 144 pump. Definitely find a stainless impeller, none will load a piped 701 at low speeds. The...
-
fastgtfairlane reacted to waxhead's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
When people ask me why I rate the 46 mm Mikuni SBN so highly, it comes down to the balance between signal, throttle response, and...
-
Yep, Lord Mounts are probably in a bind due to bad alignment. Align the Exhaust System Parts first without the Mounts and then see where...
-
fastgtfairlane replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.You can change settings on the zeel cdis as long as you have the proper programming cable. You can download the software on Zeeltronic...
-
fastgtfairlane replied to the thread Factory pipe Lord mount.Your pipe sounds like its not aligned correctly. Maybe its hitting the hull somewhere or the lord mount is too short. I have the tnt...
-
fastgtfairlane reacted to waxhead's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
If you’re running OEM 44s, the stock manifold will be fine. In fact, I’d rate it as the second-best manifold out there. All the work I...
-
fastgtfairlane replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.i agree and wish i wouldve gotten the 46s instead of the 44s when i bought them. im also very curious of how your manifold compares to...
-
fastgtfairlane reacted to waxhead's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
46 mikuni are the unsung hero. i used them on my 550 i raced at the worlds. The ski was fast and responded well. The rider not so much haha
-
fastgtfairlane reacted to waxhead's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
my carb choice goes like this and its worked out of your budget. 1 being no budget 4 being best budget 38s oem44s 46 mikuni and...
-
fastgtfairlane reacted to waxhead's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
How to Turn Your 701 62T Into a Real Mini Weapon Start with a stock Yamaha 701 62T. First job: remove the stock head and throw it away...
-
fastgtfairlane reacted to WFO Speedracer's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
My choices are defiantly dictated by a budget of zero dollars and I have OEM dual 44's so you know what I am going with.
-
fastgtfairlane reacted to WFO Speedracer's post in the thread The Opposite of Bogging FX-1/Super Jet with Like.
The issue is from what you have stated is there is little to point the way to your actual problem , you are going to have to do some...
-
fastgtfairlane replied to the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders.The 62t in my opinion is the best of the 61x and 64x cylinders. It still has decent port timing stock, the casting and sleeves are...
-
fastgtfairlane reacted to waxhead's post in the thread I need some knowledgeable opinions on 61x versus 62T -64X cylinders with Like.
A stock 62t is 118 transfers the same as 61x except they are not closed over with casting. The exhasut is where it differs and the 61x...