fastgtfairlane's latest activity
-
fastgtfairlane replied to the thread Laser Cut Fiberglass Reinforcement Fabric or Template.My superfreak had a crack like that in almost the same exact spot on both sides. The crack was actually just in the gelcoat and in a... -
fastgtfairlane reacted to WFO Speedracer's post in the thread Laser Cut Fiberglass Reinforcement Fabric or Template with
Like.
Yeah skip the chopped mat , it's crap and is not designed to be used with epoxy resin , it's designed for use with polyester resin which... -
fastgtfairlane replied to the thread First blown engine. =(.I would consider a big boy engine to be power valve cylinder and 900+ ccs.
-
That there is about as real as the chance of @Aquaholic finishing the Blunderjet story!
-
-
fastgtfairlane reacted to WFO Speedracer's post in the thread The Opposite of Bogging FX-1/Super Jet with Like.
You want to know what I really think , ok here goes pull , the damn carb already, it's a single carb 61X , I know personally I could...
-
fastgtfairlane replied to the thread Roll Call.I say Aquanuts is only permitted to come if he brings the monster 550 stroker and the tpe bathtub
-
fastgtfairlane replied to the thread First blown engine. =(.I believe sbt is producing new 760 cylinders for the rtr revolvers if im not mistaken.
-
I'll try to come down and actually stay more than 6 hours haha I'm camping in BK's backyard ;)
-
fastgtfairlane replied to the thread Roll Call.Im gonna try to make it down this year
-
2 EPIC Sessions
-
fastgtfairlane replied to the thread First blown engine. =(.Big boy engine.
-
Last bore on the cylinder and figured after 10 years she could use some preventive maintenance. I did check the ring gap in multiple...
-
Broken piston skirt is ALMOST ALWAYS too loose in the bore.
-
fastgtfairlane replied to the thread First blown engine. =(.It was probably in need of a bore when you replaced the pistons and the new pistons caused the issue. Ill bet the cylinder walls are egg...