Recent content by DamonB06

Here is a better vid.

This has to have been done in a tumbler.

I checked there and its dry. After removing the paint, I found the source. There is a pin hole pictured inside that diviot. I am pretty sure that it should not be there so now I am interested in fixes. JB weld maybe? When I turn the carb over, fuel leaks from here.

What is this in the red circle? Fuel is leaking pretty badly from here. If its not coming from there then there must be a crack in the housing because fuel leaks profusely even at idle.

http://www.x-h2o.com/index.php?threads/615-toby-composites-parts-thread-from-nose-to-ride-plate-and-all-in-between.106770/

Just stumbled across the sequel to the original "Wave Blaster River Run" video. I have not seen this posted here yet.

Worked well for me. The video was pretty entertaining. I would have cried when that full spectrum broke in half.

I picked this Scorpion Lithium battery up used on the forum here. It has 507cca and is very light. It says right on the top that you can use a normal charger. I used a battery tender as a charger if it needs it. It even has a charge level indicator built into the top which is pretty convenient...

So, should I pull it out since I am adding a FCV?

I recently picked this ski up and will be adding a flow control valve but what is the elaborate looking restricter in the stinger line. I have looked at pictures of other b pipes on the net but have never seen this before. Should I rip this out before adding the flow control or do both?

The blaster does come with a siphon bilge. You should make sure that is operational first as OCD said. Mine is working but water does still accumulate if you are not doing much high speed riding and are in the water a lot. I have read that the versiplugs like the ones JM sells bellow really do...

Both editing and riding were awesome. Really nice work.

Scottie, How does the Watercross of Texas ride plate compare to the Pro Tec that you recommend above? http://www.extreemthrottleinc.com/ProductDetails.asp?ProductCode=wotb1plate I assume you are saying full 62t based on your compression comment right? That is lots of great info there. Thanks...

If you want to be real cool, you could work in some PIP pins like these. https://www.pegasusautoracing.com/productselection.asp?Product=3043

Could you post up pictures of your reinforcement job? I have not seen much info on the toppic.