what are most of you guys running for a prop

[redsxr800]

what are most of the sxr guys running for a prop ?

i have done = 28cc head, wet pipe with the rejeted carbs and timing advance, vforce reeds, reed spacer,and probably something else i`m boaring my noozle and making a pump cone now
and also is stock was 14/19 or is it 13/18 see it both ways on ebay.
thanks russ

 

[Bigfish]

9/17 big hub swirl set back works real good with wet wolf cone and bored nozzle(80mm) stock pump.

 

[djkorn1]

I am still have the stock Solas Swirl. Did it make a huge difference?

 

[tipafew]

When I had a stock class SXR I tried a few different props and found very little improvement over stock.

 

[Shonuff]

When I had a stock class SXR I tried a few different props and found very little improvement over stock.

Same here.

I've run 13/21 -5mm Dynafly, 13/19 -5mm Dynafly, 12/17 repitched stocker and none have been much better than stocker for all around.

 

[Crab]

80mm nozzle seems to be the ticket for all over performance.

 

[djkorn1]

Thanks...I'll just keep my stocker and clean it up!

 

[redsxr800]

i`m going to rock my stocker for now also. lay offs are getting longer

 

[tipafew]

80mm nozzle seems to be the ticket for all over performance.

Yep, that's the same thing I found.

 

[2lick]

This may help you some...

http://x-h2o.com/showthread.php?t=44106