The most width in footholds.

Mile9c1

X-H2O.com
Location
Grand Rapids, MI
superslug137 said:
OK...the redesigned cyclones are deeper...wider and have a piece to grab w/ the toe...they DO almost touch the outter most part of the fiberglas...believe me they are NICCEE!!! show me how to put pics up and i will show ya

LOL, those aren't even close. Check out my Waterdawg footholds, you get a wider stance because there is ankle relief in the gunwales:

http://www.pwctoday.com/attachment.php?attachmentid=11032&d=1122265320

I don't know if Jeff can make these anymore, his new ones are similar but they don't intrude into the tray as much. $99.
 
WOW Jeffs new footholds are a ton wider than the old ones. Just look at the rear of the ski where the turf will meet the paint in my picture. The foothold on the left of the ski is waterdogs and the foothold on the right is a 24-7 foothold. You can see that with the waterdog your foot faces foreward instead of your heals almost touching. And the 3rd picture shows how far the water dog sets your foot basically inside of the gunwell of the ski. Don't pay attention to the large hole on the top of the ski that is bacause the 24-7 foot hold neded a huge hole compared to the waterdog.
 

Attachments

  • waterdoginstall1.jpg
    waterdoginstall1.jpg
    78.3 KB · Views: 111
Last edited:

Mile9c1

X-H2O.com
Location
Grand Rapids, MI
Speedfreak said:
WOW Jeffs new footholds are a ton wider than the old ones.

Just the parts that protrude into the tray, nothing in the gunwale area. My suspicion is that he used his original molds and ground some material off to make the "new" ones.
 
Top Bottom