SXR Sxr Pump Mystery

[Goesbiggest]

First Post Here Guys so help me out!!!
At what point do i need to do some mods on my Pump?? My ski is a wannabe limited 2010 sxr800.. tbm/r&d after burner?? confused about it? will it help my ski? here is my set up
factory wet pipe with factory jetting and timing advance
TDR baffled water box, vforce three with reed block spacers, custom port matched intake mani by west coast porting, ocean pro filters, stock carbs with choke plates removed,( installed primer) dry up pipe trick, jetworks control valve, blowsion exhaust cap, bunch of handeling mods, bars,sponsons ect! impeller by dave@impros..5mm setback plus his magic
I ride at 3500 feet..
Any help/advice is greatly appreciated

 

[MTRHEAD]

You will get more power and hit by putting the OEM waterbox back in that thing than anything listed.

 

[Goesbiggest]

Thanks for the reply,
Very curious about the tdr waterbox as it came highly recomended!
Any advice on pump question?

 

[Big Kahuna]

Thanks for the reply,
Very curious about the tdr waterbox as it came highly recomended!
Any advice on pump question?

I would take Motorheads advice.

Add the R&D pump plugs into the back of the pump shoe. You could fill with epoxy also, the plugs are easy, takes about 10 minutes to install.

 

[Goesbiggest]

I bought and installed pump stuffers from R&D..it was super easy..
what got me started on this is I wanted to do all i should while i had pump out of ski!
I really appreciate the help. I am a Newb.. This isnt my first ski but it is my first sxr!
I mainly like to shred the buoys.. enjoy wake jumping as well..Truthfully i just want to smoke my Buddy on his sxr:nana:

 

[Shonuff]

I have a Solas Mag pump and it's not $1500 better than my stock pump with the TBM pump cone pro. Go with that one or the Afterburner. Keep the TDR but drill a bigass hole in the baffle when you get the chance. It may not generate as much power as the stocker but it sounds waaaaaaaaaaay better.

 

[Shonuff]

Get some.

 

[Goesbiggest]

Thanks for the word Shonuff,
Here is what i did, I called impros and actually was able to catch dave and he took the time to listen to my setup and altitude where i ride! He said like you did about the afterburner, so Dave took a dynafly and set it back for me and did all his other magic and shipped it out, I get the parts tomorrow! yiiippppeeeeeee
Pardon the pun but iam "baffled" on how the tdr box performs less then the stocker??? somebody tell me whats up with that!
REgardless it sounds super sick! It Aint coming out boys...lol