Super Jet Round Nose Tray Foam (How many cubic feet? ~Volume~)

[BrightE's]

So I'm going to be dropping some footholds into the trusty old Round Nose, and in the mean time refoaming my tray out of precaution. I am currently tracking down some EPP foam to fill the lower half of the hull under my tray and am I'm working with a few local companies so I don't have to pay for a 8' plank of foam to be shipped. But... I am wondering volume wise, how much foam I should be considering? Once again, I am only EPPing the lower half of the hull. Will be pouring 2-part expanding urethane and sculpting the top half.

For reference, this here EPP sheet in 1" thickenss is roughly 2 cubic feet. http://foammart.com/rigid-foam/epp-expanded-polypropylene/poo Would something like that do?

Cheers,
Paul

 

[BrightE's]

I guess a shortened version would be... Does one of the large pink 2in x 48in x 8ft EPS foam planks from Home Depot do the job?

 

[BrightE's]

Anyone? How many of these will I need to refoam my tray?

http://www.homedepot.com/p/t/100320...d=10051&N=5yc1vZbaxx&R=100320352#.UPnIaR3oROM

Paul

 

[txsuperjetfreak96]

One sheet is plenty i didnt even use a full sheet of 1" thick kind


Sent from my iPhone using Tapatalk