Sup guys. I'm planning on doing a top end rebuild with new ada head this weekend from a kit i got from jetmaniac/blue. I will be running my stock pipe for now until I have extra funds to look into a pipe. Can anyone help me out with a diagram on how to run waterlines? Much appreciated. Thanks!
Super Jet Need help with running waterlines please.
- Thread starter pngo121
- Start date
Mike W
Infidel
- Location
- North Florida
If your going to run the stock pipe, just reconnect the waterline on the back of the head and keep the front plugged.
are you running two pissers? the front one you have T'd with 1/8" fitting to the pipe and the rear you have T'd from the head, lower manifold, and out the pisser. is that correct?
did you tap another fitting onto your pump or you just running a single inlet? also, do you know if your ski is running too cold? ive read on here that it isnt good to have your ski running too cold. thanks a lot for your help.
having a very hard time finding the reducer T with 1/8" fitting. did you cut off the 1/8" fitting on the exhaust and tapped in a 3/8" by chance?
I'll give that a shot. Thanks for your help!