- Location
- grand island new york
im lookin for the best freestyle impeller i can get for my 04 sxr.what is the best brand/ratio size for the best low end power willing to sacrifice all my top end.Any suggestions???
impeller question
- Thread starter stuntinsxr
- Start date
5810
WHERE-THE-SEAT-AT
- Location
- Knoxville TN
hey, get a 9/17 skat swirl cut back, killer bottom end, don't get a 12/17 skat swirl like me, very minimal bottom end gain, & lost huge top end. Im going to get it repiched to 9/17.
- Location
- New York Crew
What else have you done to you ski as far as performance mods go?
- Location
- grand island new york
I just bought it less than a month ago and it came with a r&d ride plate and a timeing advance kit.looking to do a impeller, intake grate,pump stuffers,the whole cf reeds, spacers,stuffers and def some good footholds over the winter!
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
loose the Ride Plate or cut it short. As for intake grate, get the worx maxiloader grate for the SXR. Timing advance is good, also, you can send your stock prop to Dave at impros, he can add his machine finish to the prop and repitch to a 13-17 with 3mm cutback, it gives really good improvement. Look for a FPP Wet Pipe also.
- Location
- grand island new york
yea i was told to ditch the plate by a few and will look into the prop work by dave. thanks for the info
- Location
- Cleveland Ohio
Yep, ditch the plate or cut it off. I wouldn't spend money on the reeds... go with a cut head or an aluminum flywheel instead.
PS...I am still pretty happy with my stock impeller. Doesn't it come stock with a Solas Swirl 12/17 Aluminum?
PS...I am still pretty happy with my stock impeller. Doesn't it come stock with a Solas Swirl 12/17 Aluminum?
- Location
- New York Crew
I think it's a 13/18 Stainless Steel, but very good all around. Mine is a Solas 13/21 Concorde impeller w/5mm custom cut back from Impros. Slighty better all around for my set up.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
That prop is great, the biggest difference is it pulls harder through the midrange. top speed is about the same as a worked over IMPROS OEM prop.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
I take that back, the boat that I compair mine to has a worked OEM prop, so he is running better than OEM Impeller.