factory pipe.

[Jayski]

Will this factory blaster exhaust fir an x2, or will this not fit aswell as the limited?? or iss this a limited???

Also when people run factory pipes do you still run a waterbox up front?

 

[proj240sx]

yes it will work. that is the factory mod pipe. you will still need to run a waterbox, way to much noise without. limited pipe works well too. thier is a lot of info on this topic on this site. both pipes have been run in x2s. dont forget to rejet your carbs!!!

 

[Jayski]

what manifold do you run?? cause i tyred fitting my mates to a standard manifold and it wasnt going to fit, His 3 stud manifold was on a different angle?

 

[Winter X2]

You need a west coast manifold. I saw one for sale on ebay just yesterday. You could prob get it cheap.

There is 2:

http://cgi.ebay.com/ebaymotors/kawa...80413640836QQptZPersonalQ5fWatercraftQ5fParts

http://cgi.ebay.com/ebaymotors/kawa...80417070954QQptZPersonalQ5fWatercraftQ5fParts

Good luck!

 

[Crab]

You need a west coast manifold. I saw one for sale on ebay just yesterday. You could prob get it cheap.

There is 2:

http://cgi.ebay.com/ebaymotors/kawa...80413640836QQptZPersonalQ5fWatercraftQ5fParts

http://cgi.ebay.com/ebaymotors/kawa...80417070954QQptZPersonalQ5fWatercraftQ5fParts

Good luck!

ditto

 

[Jayski]

jj

but the westcoast manifold is exactly the same as the standard manifold right? besides being a biggerbore.

 

[Winter X2]

Nope. The west coast manifold bolt pattern is turned slightly counter clockwise to give you clearance for your pipe and chamber. Read my build thread on my X2 and look how tight my chamber is. I had to use the west coast manifold as well and I had to ground of the mount to make it work. Its worth it.

http://www.x-h2o.com/attachment.php?attachmentid=79387&d=1236994786

 

[diamondaudio10]

i had to grind one side of my westcoast mani for the fp to fit in my x2. def run a waterbox, i tried it without and it sounded like i had a big block under the hood