Super Jet Blowsion Bilge Bracket and Riva Deluxe Kit install - stumped

[JetMufassa]

Decided to install the bracket and bilge last night. Question is to install the Bracket you need to remove the OEM Siphon as that ends up being in the way and the Rule bilge will sit in place of the OEM Siphon which I hoped to keep. is this right or am I missing something here. Pic's of anyone that's mounted a Blowsion single bilge bracket would be appreciated.

SuperJet is a 2013

Thanks

Leo

 

[Yami-Rider]

If the bilge bracket doesn't have a screw hole to bolt the stock siphon too just stick the siphon under the motor...I run dual bilge and that's what i did.